Simatara Build 12-12

Draw line and trim hull
0
Draw line and cut deck
0
Deck Finish cut
0
Round file into corners before folding
0
Second corner
2
Folding is after trimming
0
Hull edge folded in
0
Mark center line on hull
0
Getting center line to inside
0
No turning back, cut the hole.
0
Glue 2 trunk half's together
0
Mark keel trunk on template.
0
My keel needed some work to fit into trunk
0
Dry fit the 3 together
0
Trunk with glue
1
Top support
0
Bow taped ready to glue.
0
My assistant ....
0
set up to drill rudder post. Hull and deck
0
Post glued in
0
Deck and hull ready to glue together.
0
Taped in place. Start gluing MEK from the stern.
0
Gluing where the tape was.
0
Needed to pull out a spot before gluing.
0
Rod glued in keel. cut off after.
0
 
1 - 25 of 25 Photos
Rss_feed