DIRECTWIRE™ WIRING INFORMATION - TOYOTA / CELICA / 2004 / Security

12volts / black/red and white / (+) / ignition harness 
Starter / black/white / (+) / ignition harness 
Ignition / black/orange / (+) / ignition harness 
Notes: When doing remote start, this wire must be isolated from the keyswitch with the ignition relay. See DirectFax document 1077 for wiring information.
Power Lock / brown / (-) / passenger kick or BCM 
Notes: The BCM (Body Control Module) is located just to the right side of the radio. Remove the radio to access.
Power Unlock / yellow/black / (-) / passenger kick or BCM 
Notes: The BCM (Body Control Module) is located just to the right side of the radio. Remove the radio to access.
Lock Motor / blue/white / (5wi) / driver kick or BCM 
Notes: The BCM (Body Control Module) is located just to the right side of the radio. Remove the radio to access.
Unlock Motor / blue / (5wi) / driver kick or BCM 
Notes: The BCM (Body Control Module) is located just to the right side of the radio. Remove the radio to access.
Disarm Defeat / blue/red / (5wi) / passenger kick or BCM 
Notes: The BCM (Body Control Module) is located just to the right side of the radio. Remove the radio to access.
Parking Lights+ / use negative wire 		
Parking Lights- / lt. green / (-) / steering column 
Hazards			
Turn Signal(L)			
Turn Signal(R)			
Door Trigger / red/white / (-) / driver kick panel 
Notes: To avoid dome light delay, use red/yellow at the driver door pin for the driver door and red at the passenger door pin for the passenger door. 
Isolate each door trigger with diodes.
Dome Supervision / use door trigger 		
Trunk/Hatch Pin / lt. green / (-) / trunk light or BCM 
Notes: The BCM (Body Control Module) is located just to the right side of the radio. Remove the radio to access.
Hood Pin
Trunk/Hatch Release
Power Sliding Door / N/A 		
Factory Alarm Arm / arms with lock 		
Factory Alarm Disarm / disarms with unlock 		
Disarm No Unlock
Tachometer / brown/white / (ac) / rear of instrument cluster 
Horn Trigger / blue/black / (-) / steering column or BCM 
Notes: The BCM (Body Control Module) is located just to the right side of the radio. Remove the radio to access.
Memory Seat 1			
Memory Seat 2			
Memory Seat 3			
Immobilizer Bypass Module: / Required: No / Type: N/A / Part #: N/A
Notes: N/A

------------------------------------------------------------------------------------------------------------------


|       ITEM              |     WIRE COLOR	|POL|       WIRE LOCATION	        |
|              12V        |blk/red & white     	|+   |ignition harness             	|
|          STARTER	|black/white         	|+   |ignition harness            	|
|         IGNITION   	|black/orange *1     	|+   |ignition harness            	|
|  SECOND IGNITION	|blue/red *4         	|+   |ignition harness            	|
|        ACCESSORY	|gray                 	|+   |ignition harness            	|
|       POWER LOCK	|brown              	|-    |passenger kick or BCM *2    	|
|     POWER UNLOCK	|yellow/black        	|-    |passenger kick or BCM *2    	|
|       LOCK MOTOR	|blue/white          	|     |driver kick or BCM *2       	|
|     UNLOCK MOTOR	|blue                  	|     |driver kick or BCM *2       	|
|    DISARM DEFEAT	|blue/red            	|     |passenger kick or BCM *2    	|
| PARKING LIGHTS +	|use the (-) wire    	|     |                            		|
| PARKING LIGHTS -	|lt. green           	|     |steering column             	|
|       HEADLIGHTS	|red/blue            	|-    |steering column             	|
|     DOOR TRIGGER	|red/white *3        	|-    |drivers kick                  	|
| DOME SUPERVISION	|red/white           	|-    |driver kick                   	|
|  TRUNK/HATCH PIN	|lt. green           	|-    |trunk light or BCM *2       	|
|  FCTRY ALARM ARM	|arms with lock      	|     |                            		|
|FCTRY ALRM DISARM	|disarms with unlock 	|     |                            		|
|       TACHOMETER	|brown/white         	|     |rear of instrument cluster  	|
|      SPEED SENSE	|white/red          	|     |rear of instrument cluster  	|
|       BRAKE WIRE	|green/white         	|+   |brake switch                	|
|     HORN TRIGGER	|blue/black          	|-    |steering column or BCM *2   	|
|           WIPERS	|blu/yel & blu/orn   	|+   |steering column             	|
|  LF WINDOW UP/DN	|green - red         	|     |power window switch         	|
|  RF WINDOW UP/DN	|blue - wht/blu      	|     |power window switch         	|
| SUN RF OPN/CLOSE	|not recommended     	|     |                            		|
|        RADIO 12V	|blue/yellow         	|+   |radio                           	|
|     RADIO GROUND	|brown               	|-    |radio                          	|
|     RADIO SWITCH	|gray                 	|+   |radio                           	|
| RADIO ILLUMINATE	|green               	|+   |radio                          	|

Notes:
*1 When doing remote start, this wire must be isolated from the keyswitch with the ignition relay. See direct fax document #1077.      
*2 The BCM is located just to the right side of the radio.  Remove the radio to access.  
*3 To avoid dome light delay, use red/yellow at the driver door pin for the driver door and red at the passenger door 
pin for the passenger door.  Isolate each door trigger with diodes.  
*4 There are 2 blue/red wires in the ignition harness. The correct ignition wire is the heavier gauge one and it has 1 silver 
hash mark. The incorrect wire has 2 silver hash marks.