The system consists of a personal computer, printer(s), modem and one terminal for every bridge table.  Prior to the start of the event, pairs register via the terminal at their table. During the event, players use the terminal to record the outcome of each board as it is played. The terminals are in contact with the computer via a wireless link and are therefore always "aware" of the current positions of both pairs and boards. The computer also controls the operation of the bridge clock via a wireless link.

Provisional results for the event become available as soon as the last result is received. The Director can update or adjust individual results before finalyzing the overall result.

The system is menu driven with a graphical user interface - the user "points and clicks" to drive the system. A single program provides access to all features - the user does not have to remember what/when specific program(s) need to be run.  See picture below.

A database is used to ensure data integrity and to simplify system updates.

Directors define custom configurations that meet their particular requirements. Once defined, these enable them to run events smoothly and effectively.

Automated timers and audible warnings are available during play.

Provision has been made for an unlimited number of movements, events and players.

Although the system can be 'shared' between Clubs each Club can only access its 'own' information.

The system is operated on a 'pay as you play' basis to ensure affordability.

The (optional) integrated bridge clock(s) provide comprehensive time management facilities.

The picture shows the system menu from which the user controls the operation of the entire system - in this case the launch of a new event.

There should be a terminal at every bridge table. Terminals are portable, wireless and battery operated. To conserve energy, a terminal will switch itself off when it is not being used. A terminal has a display and 2 command buttons and communicates with the computer via a wireless link.

Players register themselves before the start of the event using the terminal at the table where they will play the first round.

During the event, players use the terminals to record and enter results. Terminals operate in a way that prevents the introduction of invalid data.

Every installation requires a modem which is attached to the personal computer via a serial port.  The modem handles all communication between the computer, terminals and clock(s) via a wireless link.

A modem is equipped with an antenna and should be placed away from strong magnetic fields (for example speakers) which could interfere with the functioning of the wireless link.

Operation of the wireless link does not require a broadcast licence.

The effective range of the wireless link is approximately 100 meters.