Recall Ventures

Recall Ventures

Master Distributors for Acl Staticide for Malaysia. Established 2004, Recall Ventures has grown significantly in helping Malaysian manufacturers develope their anti static productlines , providing solution to static issues and protection on products , processes , toolings and work stations.

Acl Staticide is a global leader in Anti Static solutions , which its primary business and objective is to focus on development, manufacturing and distribution of its award winning and ISO 9001:2000 certified products.

 

Master Distributor Malaysia

Recall Ventures

PO BOX 57

Jelutong,11600 Penang, Malaysia

Product Center :

149 Victoria Street , Penang, Malaysia.

Customer Service Hotline : +6012 477 5586

Fax : +604 646 0130

US Fax : +509 271 3834

email : rvcustser@gmail.com

 

General Purpose ready for use   Designed for non-porous surfaces, General Purpose Staticide solves static control problems related to the attraction of dirt, dust and bacteria to all environmental surfaces, plastic products and product packaging.   Use for General Purpose / General Use (Ready to use solution for NON-POROUS surfaces): On a hard surface, 1 gallon of General Purpose Staticide will cover 2,000-2,500 square feet. 1 gallon bottle/4 gallons per case  This General Purpose anti static is light duty solution for low friction surfaces and clear high gloss materials. Used for all work surfaces, trays, tote bags, PC boards, Plastics, Dip Tubes, components, storage bins carriers, packaging, film and hard floors. Does not last as long as "Heavy Duty" . IF material is non-porous use General Purpose Toxicity and material safety: In ready to use form,  is non toxic by oral ingestion, inhalation, or dermal application: and is not a primary skin or major eye irritant. It is non-flammable, completely stable and will not deteriorate after long periods in storage. When properly applied, it complies with or exceeds all electrostatic decay criteria established for anti-static performance as set forth by NFPA and MIL B-81705, when tested in accordance with Federal Test Standard 101B, Method 4046. This is a proprietary water-based formulation consisting of several quaternary compounds. The following specifications generally apply to Genaral Use in its ready to use form. Classification Antistatic Form Liquid Color Very slight amber/clear Approximate cloud point (F°) 30°F Approximate solidification point (F°) +20°F Solubility in water Complete Dilution compatibility Water, hard or soft Density, lbs/gal 8.3 Specific Gravity 25°C/40°C .98 pH (approximate) 7-8 Odor Slight floral Taste slightly bitter Irritation None Sensitivity None Toxicity None Surface tension-reducing power Superior Flammability None Applications Spray, dip, wipe, coat Freeze-Thaw capacity excellent, no adverse effects Shelf Life Indefinite Temperature Stability Withstands up to 30 minutes @ 450°F *Can be applied as spray, wipe, dip or by transfer roller coating, gravure coating or flexographic printing *Effective in PC board solder fault reduction programs *Proven effective in relative humidities below 15% *Used in highly sensitive electronic and EDP operations *Effective in all office environments where office equipment is located.   HEAVY DUTY FORM

Designed for porous surfaces, Heavy Duty  is ideal for eliminating static electricity discharge on carpeting and fabrics. Use for Heavy Duty Mix (Ready to use solution for POROUS and ABSORBENT surfaces): The Heavy Duty mix is a long-lasting solution for high friction surfaces. Used for treating carpets, chairs, clothing, conveyor belts, totes and work surfaces with heavy use. If material is porous or absorbent use "Regular" Heavy Duty . On a porous surface, one gallon of Heavy Duty will cover 2,000 to 2,300 square feet and will last from weeks to months, depending on the application. 1 gallon bottle/4 gallons per case Toxicity and material safety: In ready to use form, it is non toxic by oral ingestion, inhalation, or dermal application: and is not a primary skin or major eye irritant. Heavy Duty is non-flammable, completely stable and will not deteriorate after long periods in storage. The following specifications generally apply to Heavy Duty in its ready to use form. Classification Antistatic Form Liquid Color Very slight amber/clear Approximate cloud point (F°) 30°F Approximate solidification point (F°) +20°F Solubility in water Complete Dilution compatibility Water, hard or soft Density, lbs./gal 8.3 Specific Gravity 25°C/40°C .98 pH (approximate) 7-8 Odor Slight floral Taste slightly bitter Irritation None Sensitivity None Toxicity None Surface tension-reducing power Superior Flammability None Applications Spray, dip, wipe, coat Freeze-Thaw capacity excellent, no adverse effects Shelf Life Indefinite Temperature Stability Withstands up to 30 minutes @ 450°F *Can be applied as spray, wipe, dip or by transfer roller coating, gravure coating or flexographic printing *Effective in PC board solder fault reduction programs *Proven effective in relative humidities below 15% *Used in highly sensitive electronic and EDP operations *Effective in all office environments where office equipment is located.

CLEARLY the best static protective coating for plastics that has never been seen!

This coating gives long-lasting protection and will not wash off with water as an anti-stat would. Topical anti-stats are biodegradable and need reapplication after a few weeks whereas The Safety Shield provides dependable protection by allowing static to dissipate at a safe rate regardless of relative humidity and without reapplication. The advanced formulas are blended from durable polymer materials that are safe to use in ESD controlled environments where contamination is a concern. These single-coat systems are flexible enough for soft plastics like tubing, clamshell protective packaging, carrying trays and lids and they dry with a seethrough clarity that surpasses any ambient cure coating on the market.*

Easy to apply, the Safety Shield can be brushed, dipp , sprayed and provides excellent adhesion to a variety of plastics without any special cure treatment. So defend your plastic parts, bins and shelving against static with The Safety Shield .

 

Features and Benefits

Static Dissipative - Provides a surface resistivity of 105 – 107 ohms/sq

Translucent - Perfect for viewing ports on machines

Durable - Doesn’t chip or peel and is able to withstand normal handling without scratching

Adhesion - Bonds to a variety of plastics

Customize Special formulations available for lower resistance and complex plastics

No Contaminants - No silicone, No chlorides

Easy to Apply - No special equipment necessary

*Easy to Use 6300 has no special drying requirements

6400 requires a low temperature heat cure

 

The ESD Safety Shield

Translucent Dissipative Coating for Static Protection

Product Code 6300S, 63001, 63005

Intended End Use To coat acrylic, polycarbonate, PET, PVC plastics for interior ESD applications

Product Code 6400S, 64001, 64005

Intended End Use To coat polypropylene and polyester plastics for interior ESD applications

COMPLIANCY

Static Decay Meets MIL B-81705 when tested in accordance with

Federal Test Standard 101B, Method 4046

Resistance Meets ANSI / ESDA S20.20 and IEC 61340-5-1

Regulated Chemicals Meets EU RoHS and China RoHS

PHYSICAL PROPERTIES

Resistivity 10E6-10E7 ohms per square*

Weight/Gallon Range 8.7-9.1 lbs

Coverage (foam brush) 1500 sq. ft. / gallon @ .5 mil dry (approx)

Coverage (flow coat) 600 sq. ft. / gallon @ 1.5 mil dry (approx)

VOC Range 1.18 lbs / liter

Freeze Thaw Cycle Do not Freeze

Contaminants No Chlorides, No Silicone

Abrasion Resistance Coating exhibits resistance to abrasion that is similar to or better than that observed on bare substrate

Solvent Resistance Coated panel was submerged in a 50/50 mix of isopropyl alcohol and

water for 30 minutes to no effect

Transparency 93 – 96% T measured by UV Spectra

Shelf Life Three months (retest older material prior to use)

 

APPLICATION RECOMMENDATIONS

Application Method: Dip, flow coat, HVLP Sprayer, polyurethane-foam brush, or trigger sprayer

To promote clarity and prevent specking, plastic surface should be cleaned and dust-free before applying

This ESD Safety Shield. Ideal temperatures for applying coating to plastic are 60 - 75°F in 30 - 40 % RH.

 ESD Safety Shield is a water-based acrylic coating. Clean applicator tools with water immediately after use.  Safety Shield #6300 will be dry to touch in 2 hours (7 days for full hardness). Force drying is optional. ESD Safety Shield #6400 requires a force drying of 175 - 195°F for 15 – 30 minutes in an oven. As an option, parts may be preheated between 140 - 175°F for better coverage.

Maintain coated surface with 6001 Mat & Tabletop Cleaner.

*Special formulation is available with surface resistivity < 105 ohms per square