RC_Yachts |

News Flash 3/21/08

We have upgraded our paint to Interlux Perfection 2 part polyurethane.. While colors are a bit more limited than our previous choice the quality is top notch and finish will be far superior to our previous paints...

I have added a tab to the main menu wich shows the colors available.

News Flash 3/10/08

Recieved this e-mail from alistar law regarding the Tejas...

Hi Mike,

Graham asked me last year to build and test a Tejas design as he thought it would suit the weather we have up here in N/E Scotland.I have succeeded in build it and campaigning it all winter with quite good results.If I were to build another there are various alterations to be made especially the construction method as I am struggling to get the weight down - I am 20 grams under at the moment. I have used a RMG winch too save a few grams but prefer the hitec. The under deck sheeting arrangement is the same a Topiko and I am using a double purchase system again this needs modifying.

The keel position seems to be in harmony with the mast position and the yacht is extremely fast in light conditions, I won a drifter the other week. Last weekend I sailed in nr 3 rig and again had excellent results ( I won 10 out of 14 races ) I was up against a Topiko and did manage to beat him in two out of three races then he retired.

It is an easy boat to sail and I think a plastic hull would be even better and I could get in the "Hitec "

I have sailed Graham's boats since 1984 and am awaiting another new Topiko. I shall attach some pics for you to have a look at.

            Regards
                          Alistair R Law

News Flash 3/3/08

All US1M tooling has been sold and will no longer be available through RC_Yachts. Once the purchaser decides to let the public know I will update you all here.

News Flash 2/29/08

I am back working on the Tejas and expect to be launching the first prototype in June 08 Expect to be shipping hulls Nov, Dec 08.

News Flash 1/7/08

I have been busy working on a new layout for the Trinity: I am happy to report the following. The Trinity has been refitted with a new fin specifications are 95mm taper to 75mm 6% TC performance has been exceptional and will now be the standard for all Trinity from this date forward.

Also the boat has been fitted with Hitech 5955 Arm winch and I am very pleased with it as well. all boats from this date forward will also incorporate this servo as our standard setup. I will be posting some new photo's on The Trinity Page as soon as I can.