| |
NAVIGATION
|
|
|
Steamco Engines Australia
|
 Steamco Engines Australia are based in Victoria Australia and is still in production.
My personal opinion is these are one of the best made brands of engine in their price range.
They currently offer only two stationaries, the STC-01 stationary engine and the STC-04 overtype engine.
Both engines are made of copper and brass, silver soldered on a steel base with steel flywheels. They are great runners and nice to look at.
They used to offer a marine engine and a complete boat fitted with this engine. They come up rarely on ebay and are worth getting if you have the cash.
|
|
|
|
STC-01
Cylinder Bore 8mm
Cylinder Stroke 19mm
Flywheel Diameter 60mm
Solid fuel fired
Height 165mm
Length 195mm
Width 150mm
|
|
|
|
STC-04
Cylinder Bore 8mm
Cylinder Stroke 19mm
Flywheel Diameter 54mm
Solid fuel fired
Height 170mm
Length 120mm
Width 235mm
 
photos ©2007 IndianaRog
|
|
|
|
This model is now discontinued but if you are lucky you may find one
Here are the specs on it
Engine Double Acting Oscillating
Brass Boiler Silver Soldered
Cylinder Bore 8mm
Cylinder stroke 12.7mm
Lubricator In Line
Propeller 3 Bladed, 50mm diameter
Fuel Spirit Tablets
Length 280mm
Width 100mm
Height 190mm
Cost when new $375 Australian
|
|
|
|
This model is now discontinued but if you are lucky you may find one
Here are the specs on it
Engine Double Acting Oscillating
Brass Boiler Silver Soldered
Cylinder Bore 8mm
Cylinder stroke 12.7mm
Lubricator In Line
Propeller 3 Bladed, 50mm diameter
Fuel Spirit Tablets
Length 660mm
Width 190mm
Has mounting for RC steering
Cost when new $850 Australian
|
|
©2007 Tony Muir unless stated otherwise. Should you wish to use any photos though just ask and permission will most likely be given
|  |
|
