North Hammington Model Railway

START OF LAYOUT

The layout started life as a 6x4 board as i was gonna use the hornby track mat that came with the train sets but i didn't like the size so i made it into 8x4 i still wasn't happy with it so to get a good layout i made it into 10x8 and then North Hammington was born, but then i had to move rooms and the layout was dismantled and moved into the other room but the room wasn't as wide as the other room so the layout had to be shorted by 7" but could be longer at 14ft so the layout measured 14ftx7ft 5".But due to my sister coming home the layout got dismantled again and stored in my bedroom and other places but on the 1st november the layout got moved into the loft and so another track plans has been done to fill the 21ft x 6ft 5" space.

TRACK PLANS ARE CLICKABLE

All upper level with part of lower level.

This is the fiddle yard that is under the station on the upper level.

MAIN LAYOUT

All of the track work is hornby with some peco track aswell.There are four circuits of track two upper and two lower and a diesel depot on the lower level with engine sheds with a turntable and a large main station on the upper level and there will a small station on the lower level.

BUILDINGS

The buildings will be a mix of different makes some will be already made and some will be kit form.

ELECTRICS

MAIN LAYOUT

The layout will be controlled by a 2 H&M 2000 controllers and a H&M 4000 R/H add-on controller and all points are seep PM1 and peco PL10 point motors and peco switches and a Gaugemaster CDU for the main layout.

BUILDING LIGHTING

All buildings will have grain of wheat bulb's in them to light the layout up.