Shocker Tech!
Welcome to the Shocker Tech. Any problems with your shocker? Most of the problems might be
listed here. You can also have Kyle,Justin, or Jason Tech your gun for 10$ unless additional parts are needed.
Some problems you might have are:
LEAKING
A very common problem that people have and really don't know whats wrong.
Here are some possible leaking issues.
If you hear a leak on your gun, the best idea is to find where the leak is from, such as
Bolt,Noid,Reg,Asa ect.
BOLT LEAKS:
If air is rushing out of the front of your bolt, its obviosly a broken oring.
Your best bet is to take apart your bolt, and lube/inspect the orings proporly.
Remember, 1 broken oring can cause the whole gun to leak.
NOID LEAKS:
When your noid is leaking. (Usually from the trigger frame area)
this usually means your input pressure it to high. Try getting and allan key, and slowly turn your
pressure down while shooting. If this does not work, It might be an oring in the noid. Don't get
scared when you shoot and feel air on your fingers, its usually your noid letting out
air that is not needed to fire your marker.
REGULATOR LEAKS:
If your reg is leaking (depending on where).
You might have some loose/bad tephlon take inside, if its leaking out
before acually reaching your noid/bolt. Then you might want to locate the leak
and retephlon tape it. If that doesn't work, it might be a broken oring.
Pictures and Up'd Shockers.
The following shockers are up'd by Kyle and Justin.
Justins Shocker
Nicks Shocker
Tech: Justin/Kyle
Added: Frame,Trigger,Bolt,Screws/Pins, checkup.