Erie Machine Tool | International Equipment Brokers

Please Scroll Down

2000 Ton Press Brake 30'~40'

Need a 2000 Ton Press Brake within the USA, North East area prefered.

Overall bending length to be 30'~40'

Vertical Slotter / Shaper

This is the spec of what they have with their current Betts Slotter.
They need at least this capability/capacity, or more.

Betts Slotter

Table 50" (1270mm)

Max stroke 54" (1372mm)

Throat 47" (Under Ram) (1194mm)

Max Cross sectional span 40" (front of ram to the column)

Cross travel 44" (1118mm)

Longitudinal 48" (1219mm)

Let me know if you know of anything. They are in the upper midwest of USA.

steve_mrgrungy@msn.com

Plastic Injection Blow Machine 120~180 Ton

If you ever come across a 120-180 ton Injection Blow machine no older then 2004 please let us know.

Manual Lathe 100"+ x 32'+

Looking for a good Manual Lathe of 100" or more swing x 32'+(10M), within the USA/Canada

60"+ Swing X 20'ft Manual Lathe

Need a very good condition 60" swing or more X 20'ft or longer, Heavy Duty Engine Lathe, in the USA/Canada/Mexico.

Bullard Dynatrol 76"-74" or 72" w/Turret

Need a 76", 74", or 72" Bullard Dynatrol with turret.

Will also consider any Bullard Dynatrol machine that needs re built.

Dyn Au Tape will also work.

Pacific K1000-20 Brake Press

Pacific K1000-20 Hydraulic Press Brake

Close in age is OK but this make and model only

Contact: steve_mrgrungy@msn.com