150000 Lb Capacity Panjiris Welding Positioner
Panjiris Welding Posioner. ( 150000 lbs )
Age 1960
Model 3500 MVRPHT.
Table dia 33'
Table Thickness 16"
Capacity 150000.lbs at 6"
Remote Pendant Control
Infinitely Variable Speed Table Rotation
Power Rotation
Power Tilting Table
Located in Quebec area under power.
$260,000.00 USD FOB Trucks / Canada
Inquire: steve_mrgrungy@msn.com
Almega V6 Robotic Welder / Please Scroll Down
2005 ALMEGA-V6 Robot Welder Is a 6 axis Robot with a 7th Axis Rotary chuck.
[FULL 7 AXES CAPABILITY]
TWO WELDING STATIONS.
Mag/Mig/Pulse CPDPAS-501 Powersource
500 Amp water cooled welding torch
350 Amp welding torch
Fusiom Arc 180L welding cell w/72” doors
Flash Unit and memory unit
Torch cleaning station (cleaner, reamer, clipper)
UNDER POWER
LESS THEN 1,000 HOURS OF WELDING TIME.
PRICE FOB : $ 75,900.00 USD LOADED FOB Truck
2007 Melton CNC Dual Torch Rotary Welder
Click here for slideshow: http://s159.photobucket.com/albums/t142/stevehenry/Welding/CNC%20Morton%20Rotary%20Dual%20Torch/?action=view¤t=12b0f01d.pbw
YOM (2007)
CNC MELTON DUAL TORCH ROTARY WELDER
(2) miller access 450 dc welding power supplies
(2) rear mounted wire feeders with auto remote operator interface micro processor controls
Power rotary fixture
Dual torch
9-axis
Overhead Extraction Arm
Light curtains
Allen Bradly SLC5/04 CPU PLC CONTROL
PANELVIEW 1000 INPUT TERMINAL
( NEW REPLACEMENT COST $250,000.00 )
PRICE: $65,000.00 loaded on truck in Michigan, USA.
Inquire: steve_mrgrungy@msn.com
1000 Ton Brake-Roll Hugh Smith
1.5" x 30' - 1000 TON HUGH SMITH COMBINED,
SHIPYARD ROLLS, AND FLANGING MACHINE, 1968
MANUFACTURER: HUGH SMITH
YEAR: 1968 (INSTALLED IN 1974)
CAPACITY: 38.1 MM X 9144 MM
PRESS BRAKE UPPER RAM SPEEDS:
APPROACH - DESCENT BY GRAVITY: 18"/MIN.
PRESS - DESCENT IN WORKING MODE: 9"~11.4"/MIN.
RETURN(UPWARD SPEED): 84"~102"/MIN.
OPERATING PRESSURE: 5000 PSI (500 TONS)
CENTRE ROLLERS ADJ. CYLS. - 2000 PSI
TOP AND BOTTOM WEDGE GEAR CYLS. - 4500 PSI
PLATE ROLLING SPEEDS: 14 FEET/MIN.
MAXIMUM PLATE ROLLING WIDTH: 30 FEET (9144 MM)
DIAMETER OF SUPERIOR ROLL: 15" Ø
DIAMETER OF BOTTOM ROLLS: 13" Ø
CENTER TO CENTER POSSIBLE OF ROLLS: 18";22";26"
EQUIPPED WITH:
- COMPENSATION SYSTEM OF FLEXING BOTTOM AND TOP ROLLS.
- CONTROL DESK
- (2) 45 HP CROFTS MOTORS (DRIVE THE GEARBOX)
- (2) 25 HP MOTORS (ELECTRAULIC PUMP)
OVERALL DIMENSIONS:
OVERALL HEIGHT FROM GROUND LEVEL: 19'-7.75" (5988MM)
GROUND LEVEL TO FOUNDATION LEVEL: 7' (2133MM)
OVERALL LENGTH: 50' (15240MM)
DEPTH OF THE MACHINE ONLY: 15'3" (4648 MM)
OVERALL DEPTH INCLUDING CONTROL DESK + ELECTRICAL PANEL: 28' (8534 MM)
PRICE: $1.5 MILLIONS USD LOCATION: QUEBEC, CANADA
ALL OFFERS WILL BE CONSIDERED!!!
NOTE: MACHINE HAS BEEN BOUGHT IN 1995 AND THE CUSTOMER NEVER REINSTALL IT.
APPROX. PACKING LIST AVAILABLE ON DEMAND.
AVALABILITY: IMMEDIATE. ALREADY DISMANTLE & READY TO BE SHIPPED!
REPLACEMENT VALUE: $3.5 TO 4 MILLIONS USD
FOUNDATION DWG AVAILABLE ON DEMAND!!!
Inquire: steve_mrgrungy@msn.com
1996 Faccin Dished End / Flanging
1. MFG : Faccin, Italian made
2. New : 1996
3. Capacity
Max. Head diameter ........ 6,000 mmÖ
Max. plate thickness ....... 40 mm
4. Complete with
1) Head Forming machine
2) Automatic Manupulator
3) Press
5. Price : US$499,500.- Ex-works
6. Delivery : Immediately.
Inquire: steve_mrgrungy@msn.com
Mobile Harbor Container Crane
Click here for slideshow: http://s159.photobucket.com/albums/t142/stevehenry/Gantry%20Cranes/Mobile%20Harbor%20Container/?action=view¤t=9572c763.pbw
Year of Construction 1987
Minimum radius 13 meters
Maximum radius 40 meters
load 13-24 meters, 360 degrees 50 metric tons
load 13-30 meters, 360 degrees 40 metric tons
load 13-40 meters, 360 degrees31 metric tons
Max. hoisting height above wharf 31 meters
Tires 24
Total weight excl. spreaders 330 metric tons
Generators 1 for hoisting and driving, 242 kW 1 for sheer 80 kW
Diesel motors 1 mark Cummins, 340 kW for hoisting and driving
1 mark Cummins, 250 kW for leveling boom and sheer. Both with 6
cylinders and water cooling
330 metric tons
Inquire: steve_mrgrungy@msn.com
120' Fresh Water Barge
120'x33'x10.5' steel deck barge
Built by John E. Matton in 1952
Gross tonnage 585 tons
Draft: 2' Light
Shell Plate thickness: 3/8" steel
Compartments: 8
Has never seen salt water.
Located on Lake Erie
Former US Army Corp of Engineers "Welded" Barge, No ABS or Load-Line
$139,500.00 USD
Inquire: steve_mrgrungy@msn.com
Brand New Frame Benders
Schaffer Romar Model S-R 400 Hydraulic Ship
VERY SHORT LEAD TIME !
Frame Bender
MACHINE CAPACITIES
Section modulus of m.s. profile cm3 : 1,800
Max.
Tee sections (web) mm : 600 Max.
Tee sections (flange) mm : 280 Max.
Tee sections (web) mm : 120 Min.
Tee sections (flange) mm : 80 Min.
Angles (web) mm : 600 Max.
Angles (flange) mm : 260 Max.
Angles (web) mm : 120 Min.
Angles (flange) mm : 70 Min.
Large bulb sections bent in pair (web) mm :
430 Max.
Large bulb sections bent in pair (web) mm :
120 Min.
Flat bar on edge mm : 500 x 35.
Large bulb sections bent in pair (web) mm :
120 Min.
Minimum bending radius mm : 1500
(Indicated capacity are referred to material
with yield strenght of 260 N/mm2)
MAIN TECHINCAL DATA:
Bending force when pushing Ton : 400
Bending force when pulling Ton : 400
Clamping force at the center Ton : 80
Clamping force on the side arms Ton : 80
Total run of bending rams mm : 500
Run in forward direction mm : 200
Run in return direction mm : 300
Maximum day light for the web (depth) mm :
700
Distance between the clamps mm : 1500
Feed through speed mm/min : 220
Speed of Bending Ram mm/min : 400
Installed power HP : 75
Supply : 380 V – 3ph – 60 Hz
OVERALL DIMENSIONS
Total length mm : 6,500
Total width mm : 4.800
Total height mm : 2.900
- C-frame high quality steel structure,
electrowelded and stress relieved
- High precision linear slides for the bending
carriage;
- Adjustable pressure for clamping cylinders;
- LED digital readouts for the position of
bending ram;
- Positive and negative bending possible
without removing the section;
- Full hydraulic machine;
- Hydraulic motors for sections feed;
- Main control consolle on wheels;
- Machine protected with maximum pressure
valves to prevent overloads;
- Alarm for oil level in the tank;
- Alarm for filters;
- Safety barriers as per European safety norms
CE
Contact: steve_mrgrungy@msn.com
300 Ton Ederer Rail Gantry Crane
This crane was purchased by the US Government and never used.
Ederer crane
Estimated weight Gantry assembly (sub total) 384,693 lbs
Main Hoist Trolley Assembly 131,337 lbs
Aux. Hoist Trolley Assembly 30,326 lbs
Total 546,356 lbs
Year Built 1992
Travel Speeds Bridge Crane 150 FPM
Main Trolley 60 FPM
Aux. Trolley 60 FPM
Main Hoist 5 FPM
Aux. Hoist 13 FPM
Width Centerline - rail to rail 77 feet 3 inches
Height Top of rail to top of hoist rail 62 feet 5 inches
Electrical Service requirements Main line to gantry 2300V monospiral cable reel
Motor Sizes Main Hoist 125hp 500 VDC shunt wound motor
Aux. Hoist 30hp 500 VDC shunt wound motor
Main Trolley 20hp 500 VDC shunt wound motor
Aux. Trolley 3hp 500 shunt wound motor
Bridge travel 4-20hp 500 VDC shunt wound motors
Travel gear boxes contain lube oil pumps powered by 1/4hp 480V 3 phase motors
Monospiral cable reel uses 2hp 480V 3 phase motor
I have 60 pictures available for this unit as well as Prints !
$475,000.00 USD Southern Coastline USA. (Just Reduced !!!)
Contact: steve_mrgrungy@msn.com
New/Used Acorn/Weldsale Layout and Misc. Fab Tables
No matter what your need, please inquire for tables ! Variety changes daily.
Info: steve_mrgrungy@msn.com
15 Bundgens Jouhsen Nail Making Machines
Made by Bündgens Jouhsen (Germany)
Type: US
Year: 1992
Serial no: 920
Speed: 285 nails/minute
Machine is in a very good condition
Average Price: $8,000.00~$12,500.00
Package deal available
Wire cold forming nail machines made by Bündgens ( Germany ).
We have (15) machines available, manufacture dates: 1974-1992
Max Wire Diameter: 2.0- 2.5 mm
Length: 40- 50 mm
Speed: 285 nails/minute
Model: US & US2
$90,000.00 USD for all 15 machines Loaded to container Los Angeles, California.
Inquire: steve_mrgrungy@msn.com