Erie Machine Tool

Wysong & Miles 6’ x 1/2” Model 650 Squaring Shear

Rarely use3d, and in very good operational condition: 

Serial No:  P-34-118 (1985)
Capacity - 3/8" SS
     - 1/2" MS
Speed - 40 SPM
1/2" Rake in Upper Blade
10 Hold Downs
4-Sided Blocks Auto Lubrication
Equipped with -
  2 Speed CNC Control
  48" Front Operated 2 Speed Power Back Gauge
  10' Front Squaring Arm with Support Bracket
  31" Front Support Arm
  Spring Loaded Ball Transfer in Table
20 HP 3 Phase
Cleaned, Painted and Tested Under Power
Price - $34,950.00 FOB

Inquire: steve_mrgrungy@msn.com

American Hercules 10' x 1/4" Hydraulic Shear
S/N: S250120381, Mfg. 1978
Capacity 1/4" Thickness
              10' Shearing Length
Hydraulic Hold Downs
Finger Guards
FOPBG
Squaring Arms
Front Supports

$17,500.00 FOB

Inquire: steve_mrgrungy@msn.com

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Shears/10%20X%201-4%20HTC/?action=view&current=65baa9e6.pbw

HTC 10' X 1/4" HYDRAULIC POWER PLATE SHEAR

MODEL: 250-10A
OVERALL CUTTING LENGTH: 10' (124")
CAPACITY: 1/4" MILD STEEL
# OF HYDRAULIC HOLDDOWNS: 9
MOTOR: 25 HP, 1750 RPM, 32 AMP, 460 VOLT
BLADE SIZE: 1" X 3"
RAKE ANGLE: 11/32"
# OF HOLDDOWN CYLINDERS: 9
OVERALL DIMENSIONS: 146"L X 86"W X 82"H
APPROX. WEIGHT: 14,000 LBS.


HTC FEATURES:
-OVERDRIVEN FLATDECK MACHINE - RUGGED FRAME, SIMPLE HYDRAULICS.
-STRONG & ACCURATE BACKGAUGE
-3 POSITION FOOTSWITCH
-HOLD SWITCH
-STROKE LENGTH CONTROL
-OVERLOAD PROTECTION
-FOUR-WAY CHROME ALLOY BLADES

** MADE IN THE U.S.A.! **

Run beautifully - been all checked out by the service department - ready to ship!

$24,500.00 FOB California

Inquire: steve_mrgrungy@msn.com

--------------------------------------------------------------------------------------

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Shears/12%20X%201-2%20Cinci/?action=view&current=29343e4f.pbw

Cincinnati 12' X 1/2"

Hydraulic Shear

Model 3DL

Year 1984

Weight Approx 35,000 lbs

8" Projection Below Floor

Dimensions

14' x 7' x 8

$39,500.00 USD FOB Negotiable !

Inquire: steve_mrgrungy@msn.com

12' x 3/8"  PACIFIC Hydraulic Shear

                             Model No: 375S12

                             Serial Number: S100008

                             New 1957

                             19" Throat

                             Roller Table

                             Back Gages

Price $23500.00

Inquire: steve_mrgrungy@msn.com

$25,000.00 You load !

Brand new blade installed 6 months ago.

Inquire: steve_mrgrungy@msn.com

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Shears/14%20X%201%20Cinci/?action=view&current=d0877055.pbw

I sold this to client last year. They purchased new State of the Art Plasma System. (250K)
This shear had been re furbished and painted with many new components and electrical last year.

There are many upgrades/improvements not mentioned here:
SPECIFICATIONS

Model: 8SE14

Year: 1991 – S/N 47041

Capacity: 14'-3" x 1"

Speeds: 78 IPM – Advance; 175 IPM - Return

Maximum Rake In./Ft: 3/4"

Distance Between Housings: 14'-3"

Gap: 15”

Depth of Pit Required (For Bed): 15” (Approximate)

(Motor: 50 HP ) This machine was changed to USA 60Hz

Approx. Weight: 83900 Lbs.

Self-Compensating Hyd.Holddowns with guards.

Full Length Dovetail Across Bed Face.

All Steel Interlocked Construction.

Powered Variable Rake.

EQUIPPED WITH:

48" Front Operated Power Backgauge
12' Side Squaring Arm
Pneumatic Ball Transfers
Madison Kipp Automatic Lubrication System
Shear Control Center.
Two Sets Special Knives for shearing ¾"-11 ga. SS AL 6XN-B691,
Avesta Steel 254 SMO-UNS-S31254, and 10 ga. – 1" A36 (51 KSI max.)

REDUCED: $69,500.00 USD FOB Erie PA

Inquire: steve_mrgrungy@msn.com

1 PREOWNED CINCINNATI 16' X 1/2" HYDRAULIC SHEAR

MODEL 4FL16, SN/ 40459, NEW IN 1976/77

SPECIFICATIONS

CAPACITY IN MILD STEEL:

  AT NOMINAL RAKE OF 3/8" ------------------ 1/2" x 16'

  AT INCREASED RAKE OF 1/2" ---------------- 5/8" x 16'

LENGTH BETWEEN HOUSINGS -------------------- 16'-3"

DEPTH OF THROAT ---------------------------- 18"

BACK GAUGE RANGE --------------------------- 48"

SPEED, FULL LOAD DOWN ---------------------- 135 IPM

SPEED, RETURN ------------------------------ 290 IPM

STROKES PER MINUTE - FULL LENGTH CUT ------- 13

STROKES PER MINUTE - 24" CUT --------------- 40

HOLDDOWNS (12" CENTERS WITH EXTRA HOLDDOWNS

  AT BOTH ENDS) ---------------------------- 19

HOLDDOWN FORCE, TONS ----------------------- 55

APPROXIMATE SHIPPING WEIGHT ---------------- 66,900 LBS.

EQUIPPED WITH

HOLDDOWN AND KNIFE GUARDS

ADJUSTABLE RAKE

ADJUSTABLE STROKE

PNEUMATIC OPERATED ROLLER BALL TOP TRANSFERS IN TABLE

AUTOMATIC PRESSURE LUBRICATION

SINGLE STROKE CONTROL, INCLUDING "INCH" AND "RUN" OPERATION

HYDRAULIC HOLDDOWNS

WATER COOLED OIL COOLER

10' SQUARING ARM

2 FRONT SUPPORT ARMS

NOTE

SPECIFICATIONS SUBJECT TO VERIFICATION

INVESTMENT

F.O.B. AMES, IA ----------------------------------- $69,500.00

TERMS

CASH BEFORE DELIVERY

DELIVERY

IMMEDIATE, SUBJECT TO PRIOR SALE

LOADING

F.O.B. AMES, IA

Contact: steve_mrgrungy@msn.com

20'ft X 1" CINCINNATI Plate Shear
Shear - Power Squaring Hydraulic
Serial 39678
Model 8NL
Capacity 1" MILD STEEL
Distance Between Housing 20'3"
Maximum Rake 5/8" PER FT
Holddowns - Force 133 TONS
Number Of Hold Downs 23
Front Operated Power Back Gauge 60"
Shear Speed Down 61" PER MINUTE
Shearing Speed Up 170" PER MINUTE
Stroke Per Minute 3 @ FULL STROKE
Squaring Arm 10'
Front Arm Supports 3
Blade Size 1-1/2" X 5-1/2 X 20'
Ball Transfer Table YES
Distance Under Hold Downs 2-1/2"
Electric Foot Trip YES
Light Beam Shearing YES
Motor 40 HORSEPOWER

$125,000 USD FOB Ohio USA

Inquire: steve_mrgrungy@msn.com

 (1) USED, 20' X 1/2" PACIFIC MODEL 500R20 HYDRAULIC POWER SQUARING SHEAR

MODEL: 500R20
SERIAL NUMBER: S10468
MFD: 1969

CAPACITY: 20' X 1/2" @ 3/8"/FT. RAKE ANGLE M.S.
MAXIMUM RAKE ANGLE: 5/8"/FT.
SHEARING CAPACITY AT MAX. RAKE: 20' X 3/4"
KNIFE SIZE: 1-1/8" X 5" X 244"
DISTANCE BETWEEN HOUSINGS: 20'3"
THROAT DEPTH: 18"
HOLDDOWN PRESSSURE: 63 TONS (TOTAL)
ADVANCE SPEED: 144"/MIN RAPID ADVANCE
               96"/MIN NORMAL ADVANCE
RETURN SPEED: 270"/MIN
TABLE HEIGHT ABOVE FLOOR: 36"
BED PROJECTION BELOW FLOOR: 8"
MAIN MOTOR: 40 HP
EQUIPPED WITH:
  48" FRONT OPERATED POWER BACK GAUGE
  12' SQUARING ARM
  BALL TRANSFERS IN BED
  AUTOMATIC LUBRICATION
  FOOT SWITCH
OAD: 22'7" L-R X 9'5" F-B X 12'0" HIGH
APPROXIMATE WEIGHT: 93,000 LBS.

PRICE: FOB Houston, Texas Warehouse ……. $99,500.00

Inquire: steve_mrgrungy@msn.com

One (1) Used Kasto SBA 400 AU-G-NC Automatic Bandsaw

w/ Mitering Capabilities

Cutting Range:

Miter Range                           0º                                 +45º                             +60º

Round                                     15.7"                           12.6"                           9.4"

Square W x H                         15.7" x 12.6"               12.6" x 12.6"               8.6" x 8.6"

Smallest Diameter                                           .04"

Min. Cut-Off Length                                      .24"

Min. Remaining Length, Single Cut               1.2"

Min. Remaining Length, Auto Mode             9.5"

Auto Material Feed, Single Feed Max           23.6"

Auto Multiple Feed (9 Fold)                          212.6"

Maximum Material Weight                             270 lbs

Cutting Speed                                                 56-295 ft/min Infinitely Variable

Cutting Feed                                                   Infinitely Variable

Material Clamping                                          Hydraulic, from 20-60 bar

Blade Dimensions                                           194" x 1.34" x .04"

Sawband Guide                                              Carbide, Exchangeable

Sawband Tensioning                                       Mechanically w/ Clamping Handle

Sawband Cleaning                                          Driven Wire Brush (Exchangeable)

Coolant                                                           2 Coolant Nozzles (16 US-gal)

Equipped With:

Kasto NC Control

Hold-Down/ Bundle Clamping

New Replacement Sawbands (Purchased from Kasto)

Complete Set of Manuals

Note:

• Machine can be inspected under power
• Machine Prep and Loading Included (If a skid is required please add $100.00)
• Location:  North Georgia
• $19,000.00 FOB Georgia

Inquire: steve_mrgrungy@msn.com

NEW, VANGUARD MODEL H-8056

 SEMI-AUTOMATIC HORIZONTAL BANDSAW

MODEL: H-8056

SERIAL NUMBER:

MFD:

Capacity: 22" Round

          31.5" X 22" Rectangular

Blade Speeds: 55, 80, 115, 150, 215, 250 FPM

Blade Size: 277.2" X 2" X .063"

Motors: 10 HP Blade Drive

        3 HP Hydraulic Pump

        1/4 HP Coolant Pump

Equipped With:

  Blade Stalling and Breakage Shut-off

  Hydraulic Blade Tension

  Powered Blade Cleaning Brush

  Hydraulic Work Lift Rollers (2) with Power Feed

  Hydraulic Clamping

  Carbide Blade Guides

  Extra Roller Conveyor, 40" Long

  (1) Bi-metal Saw Blade

  (1) Set of Tools and Tool Box

Floor Space: 144.6" X 84.5" X 73.7"

Machine Weight: 9,900 lbs.

PRICE:  ……. $32,500.00

  1-Used Esab Avenger II combination Oxy/Fuel and Plasma cutting sources.

     Table has capacity for (4) 96” x 288” pieces of plate.

     Table is a bridge type, dual side drive running on rails tied to the floor.

     Machine was new in 3/96.  Model: Aveng II  SN: 96-2070-3980

     Table has (2) Oxy/Fuel torches and (1) Plasma torch powered by a 600 Amp plasma  power

      source. Plasma power source Type: PB-6000  SN: PB 1551178

     Plasma torch SN: AORI 606062  115 Volt.

     There is a Galt water table that supports the plates. SN: 95-170

     A lot of the burning was performed underwater to cut down on the amount of exhaust

     smoke and contaminants.        

     Cutting feed rates:

     ¼”, 5/16”, 3/8”, 120 IPM

     ½”  100 IPM

     5/8” 70 IPM

     ¾” 63 IPM

     Machine can be seen under power.

     Price: $99,500 on location.  Near Cinti., OH.

  Please call if you have questions or would like to arrange to inspect this burning table.

Inquire: steve_mrgrungy@msn.com