Erie Machine Tool

12,000 TON VERSON DOWN ACTING
HYDRAULIC FORMING PRESS
Serial No. 23096 / Model No. 12000-HD4-240-192-2T

Manufacture: Verson Allsteel Press Co. Inc.
Year Built: 1973
Bed Size: 609.6 cm x 487.68 cm
240 inches x 192 inches

Capacity of press @ 4780 PSI: 12,000 Tons
Gross Lifting Capacity @ 4780 PSI: 1,680 Tons

Stroke of Table, working: 215 cm
Stroke of Table, total: 274 cm

Press operating speeds:
Rapid down: 289 cm/min
Return: 251 cm/min
Pressing: 35.2 cm/min

Platen size: 609 cm x 101 cm
Hydraulic removal arbor to facilitate the removal of a formed 360 degree shape.

Condition: Under power and in excellent condition with very limited run time.

This press has the capability to form high strength steel flat plate up to 16” thick
in 360 degree cylinders up to 20 feet long for pressure vessel work.

The press is the largest one of two ever built with this capacity and capability in the world.

Inquire: steve_mrgrungy@msn.com

Operational Video Available !

VERSON ALLSTEEL

MODEL: 12000HD4-240-192-2T   SERIAL NO.: 23096

NEW IN 1973
CAPACITY OF PRESS @ 4780PSI: 12,000 TONS
LIFTING CAPACITY @ 4780PSI: 1,680 TONS
STROKE OF TABLE, WORKING 85"
STROKE OF TABLE, TOTAL 108"
PRESS OPERATING SPEEDS
RAPID DOWN: 114 IPM
PRESSING: 13.85 IPM
RETURN: 99 IPM
PLATEN SIZE: 240" X 40"
TABLE SIZE: 192" X 240"
HYDRAULIC REMOVABLE TOP ARBOR
PIT REQUIRED: 70 FT DEEP

NOTES: THERE ARE SEVERAL PIECES OF TOOLING INCLUDED WITH THE

PRESS FOR MAKING CYLINDERS AND END CAPS FOR PRESSURE VESSELS.

CONDITION: ASSEMBLED BUT NOT UNDER POWER AND IN EXCELLENT

CONDITION WITH VERY LIMITED RUN TIME.

THIS PRESS HAS THE CAPABILITY TO FORM HIGH STRENGTH STEEL FLAT PLATE,

UP TO 16" THICK IN 360-DEGREE CYLINDERS UP TO 20' LONG.

IT IS THE LARGEST ONE OF TWO EVER BUILT WITH THIS CAPACITY,

AND CAPABILITY IN THE WORLD.

            PRICE: LOADED ON TRUCK'S          (Inquire please, price has been drasticly reduced)

            LOCATION: UNITED STATES

Contact: steve_mrgrungy@msn.com

Very hard to find for replacement or backup !

3000 PSI Oil Hydraulic Pumps and Motors
Very Good Condition from 3000 Ton Hyd Press
Consists of:
2-300 HP Motors
2300 Volts

2 LH + 2 RH Oil Gear Pumps
108 Gallons Per Minute @ 900 RPM
3000 PSI
Footprint of 42"W X 33"H X 60"L

Inquire: steve_mrgrungy@msn.com

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Manipulators/?action=view&current=2509112d.pbw

Comes complete with all working parts, blueprints for assembly and installation prints.

FOB LA California CHEAP ! (I will put you in direct contact with the owner)

Inquire: steve_mrgrungy@msn.com