Erie Machine Tool

Main specs of the machine are as follows:
NC Press Brake COLGAR
Model PI 8071
New 1991 with CNC control  PGR 327 Colgar

Nominal Pressure          1000 Ton
Working Length            9100 mm
d.b.c.                    7040 mm
opening height             650 mm
Throat                     800 mm
Back Guage Adjustable      100 mm and controlled
Ram Stroke                  50 - 325 mm
Total Electrical Input      50 kW
Machine Weight             118 Ton
$850,000.00 USD FOB Ship Western Europe.

Inquire: steve_mrgrungy@msn.com

Click here for slideshow: http://s159.photobucket.com/albums/t142/stevehenry/40%20ft%20and%20Larger%20Brake%20Press/2000%20Ton%2040/?action=view&current=b8dba7c6.pbw

2,000Ton Hydraulic Press Brake.
Still on foundation, but not under power for inspection.
 
Used "KOJIMA" 2000Ton Hydraulic Press(1975-made)
Model PH-2000-1200
4-Column, 2-Point, Descending Type,
with Safety Device for Upper Locking.
Table Size         :    12,000mm x 2,000mm
Slide Area         :    12,000mm x 1,500mm
Stroke             :     1,000mm
Daylight           :     2,200mm
Nominal Pressure   :     205 kgf/cm2
Electric Motor     : 95KW (4-Pole, 220V 60Hz.) for Main Pump.
                     11KW (6-Pole, 220V 60Hz.) for Pilot Pump
Oil Tank Capacity :    2,950 Liter
Operation Method :    by Electro-Magnetic Push Button

$424,500.00 FOB 

Inquire: steve_mrgrungy@msn.com

More pictures:

http://i159.photobucket.com/albums/t142/stevehenry/40%20ft%20and%20Larger%20Brake%20Press/1600%20Ton%20Pullmax%20Tandem%2012M/SKP-1.jpg

http://i159.photobucket.com/albums/t142/stevehenry/40%20ft%20and%20Larger%20Brake%20Press/1600%20Ton%20Pullmax%20Tandem%2012M/SKP-6.jpg

F O B $575,000.00 USD Europe

I am pleased to inform the following machine for you. If you are
interested in it, please contact me.

PULLMAX 1600 ton Hydraulic Tandem Press Brake
Model: SKP
YEAR: 1985

Operating length: 12200 mm (2 x 6100mm)
Internal frame distance: 5100 mm
Working height: 800 mm
Gap: 450 mm
Table width: 400 mm
Tool space: 850 mm
Press power: 1600 ton
Stroke length: 500 mm
Foundation drg No.: 50968
Weight: 2 x 108000 kg

Speeds
High Speed: 60 mm/s
Press speed: 5 mm/s
Return speed: 45 mm/s

Electric Data
Rated voltage 3-phase 380 V 50 Hz
Contactor voltage: 110 V
Valve and relay voltage: 24 V

This machine is still under power.

Contact: steve_mrgrungy@msn.com

PACIFIC 36' X 500 Ton Hyd press brake
28.5' x 5/8" capacity between frames
Year: 1975
Model: K500-36
Merlin Light Curtains
Diagram for pit available
Large assortment of tooling
Under Power

$129,500.00 USD

Inquire: steve_mrgrungy@msn.com

SPECIFICATIONS:


12000 MM X 1200 TONS
40’ X 1200 TONS
LENGTH OVERALL: 46.9' (14.310 MM)
DISTANCE BETWEEN COLUMNS: 39.566' (12.060 MM)
TABLE LENGTH: 39.37' (12.000 MM)
STROKE LENGTH: 23.622" (600 MM)

MACHINE HEIGHT:
OVERALL: 26.7’ (8,150 MM)
( ABOVE FLOOR LEVEL: 18.5’ (5,650 MM)

HISTORY:
1985: RECONDITIONED WITH NEW PUMPS AND VALVES.
1986: OIL HYDRAULIC VALVES AND HYDRAULIC SYSTEM, STEERINGSYSTEM ETC.

NEW WITH REXROTH PARTS (BOSCH).
NEW ELECTRIC CONTROLS INSTALLED.
TWO (2) HYDRAULIC PUMPS INSTALLED.

THE MACHINE IS IN VERY GOOD WORKING CONDITION WITH CLEAN CYLINDERS ETC.
UNDER POWER IN PLANT

PRICE INCLUDES RIGGING & LOADING $375,000.00

Info: steve_mrgrungy@msn.com

750 TON X 42' PACIFIC,18"STR,14"GAP,28'B.H.,60 HP,2-SPEED........
____________________________________________________________________________

       750 TON RATING
       42' LENGTH OF BED & RAM
       28'2" DISTANCE BETWEEN HOUSINGS
       BENDING CAPACITY:  1" X 12'
                        5/8" X 20'
                        3/8" X 28'
       18" STROKE
       31" OPEN HEIGHT
       14" GAP
       2 SPEEDS:  ADVANCE 90 IPM
               FAST PRESS 50 IPM
               NORMAL     17"
               RETURN     132 IPM
       24" PERMANENT WIDE BED X 6" THICK
       5" THICK BED AND RAM
       REQUIRES PIT FOR BED PLATE
       FLOOR SPACE:  42' x 100" x 16'7" HT.
       WEIGHT:       250,000 LBS.
       (5) TRUCK LOADS - (2) OVERWEIGHT 10'6" WIDE AND (3) LEGAL LOADS
       COMPLETE WITH 60 HP 230/460/3/60 HYDRAULIC PUMP MOTOR, 2200 PSI
         SYSTEM, AND ELECTRICAL CONTROLS.
       NOTE:  ORIGINALLY SHIPPED AS 30' BRAKE, LEFT AND RIGHT HORNS
         ADDED TO BEND 40' PIPE, HORNS CAN BE REMOVED.

       GENERAL CONDITION: AS TAKEN FROM SERVICE, READY TO SHIP, SEE NOTE
       FOB ......................................CINCINNATI, OHIO
_____________________________Price  $145,000.00

Inquire: steve_mrgrungy@msn.com

CNC Press Brake Model HPC2400/140

1. Technical specifications

Normal force:                                   24000  kN

Bending length:                                  14000  mm

Distance between uprights                          12050  mm

Stroke of the ram:                                 600  mm

Max. distance between table and ram:                  1800  mm

Depth of throat:                                   1200  mm

Width of table:                                    600  mm

Max. opening of V die                               320  mm

Approach speed:                                  60  mm/sec.

Working speed:                                   6   mm/sec.

Return speed:                                    55  mm/sec.

Main motor power:                                2X75  kw

Volume of oil tank                                 4500  l

Weight (appox.)                                  395000  kg

CNC controlled axis:                               3 (Y1-Y2 -V)

2. Standard Equipments including

Y1-Y2: Linear encoder for electronic ram depth—setting, equilibration, calibration

V axis: Automatic crowing on table.

T-slot on the front and back side of the table

Fixed ladder

Double foot control

Operation and maintenance instructions;

Hand tools

3. CNC Control

CADMAN CNC control from LVD Belgium:

---- The 2 cylinders synchronized control software

---- CADMAN-B programming software

---- CAD\CAM software

---- The Angle and Edge Length Calibration Expert system

4. Key components on the machine

5. Price for main machine

FOB Shanghai USD1,599,500.00

6. Optional equipments

6.1 Front and Back Feeding Unit (X1, X2 axes) 

The unit is composed of 2 front feeder and 2 back feeders which driven separately,

 by front/back high power servo motors,

and can accomplish the sheet feeding and positioning.  

6.2 Roller Conveyor (PLC Control)

The front roller conveyor consists of 4 groups.

The surface of rollers is with hardening treatment.

The roller conveyers drive the plate going forward and positioning.

The 4 groups of conveyers move down synchronously,

and leaving the plate on the sheet supporting unit.

6.3 Side Extraction Unit (PLC Control)

6.4 Tooling

Punch holder and transition tooling

Punch

Adjustable V die

7. Payment: 50% advance payment, the balance shall be paid by L/C at sight.

The L/C shall be opened within one month upon signing of the contract

8. Delivery: 210 days upon receiving down payment.

9. Warranty: 12 months upon installation for repairing or exchange,

 of the parts on the machine.

10. Quotation Validity: 4 weeks

11. Installation and Training: The buyer could send engineer to the seller’s factory

for operation and maintenance training before delivery of the machine,

the cost shall be paid by the buyer.

The seller will also send engineers to the buyer’s factory for the supervise of installation,

the buyer shall pay for tickets, food and accommodation cost. 

Contact: steve_mrgrungy@msn.com