Erie Machine Tool

Cincinatti Hydrotel: Milling machine
Serial Number 5H3V5L-2
24” x 120” table
Model LL
25HP
1970

The grinder and milling machine are fully operational.
The milling machine leaks a bit of oil and the table does not travel its full 10’
$19,500.00 FOB Buffalo, New York

Inquire: steve_mrgrungy@msn.com 

(1)   USED  MAZAK FH-880 CNC HORIZONTAL MACHINING CENTER

       NEW- 1999

      SPECIFICATIONS:
       NUMBER OF PALLETS:          2
       PALLET SIZE:                           31.5" x 31.5"
       TRAVELS:     X-AXIS:              51.18"
                                Y-AXIS:             43.3"
                                Z-AXIS:              39"
                                B-AXIS:             1 DEG.
      SPINDLE TAPER:                      CAT 50
      SPINDLE SPEED:                      15,000 RPM

      TOOL CAPACITY:                     80 ATC
      MAIN MOTOR:                          48 HP
      TABLE LOAD CAPACITY:      4,840 LBS

      EQUIPPED WITH:
      FUSION 640M CNC CONTROL
      COOLANT THRU THE SPINDLE
      CHIP CONVEYOR

            PRICE: $229,500.00
Inquire: steve_mrgrungy@msn.com

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/CNC%20VMC/2004%20HAAS%20VF2D%204th%20Axis/?action=view&current=c933f463.pbw

• Chip Auger

• Programmable Coolant Nozzle

• Rigid Tapping

• Remote Jog Handle

• 4th Axis Pre-Wire & Ready

• Coordinate Rotation and Scaling

• Custom Macros

• 1,000ipm Rapids

• 1MB Program Memory

• QuickCode Programming

Inquire: steve_mrgrungy@msn.com

Click here for a slide show: http://s159.photobucket.com/albums/t142/stevehenry/CNC%20VMC/2004%20HAAS%20VF2%202%20Units/?action=view&current=8b7ae172.pbw

(3) USED HAAS HIGH SPEED VMC’S

Model:  VF-2SS

Table size:  36” x 14”

Travels:  30” x 16” x 20”

Spindle speeds:  12,000 rpm

Spindle HP:  30

Spindle taper:  Cat 40

Spindle nose to table:  4” to 24”

Rapid traverse rates:  1400 ipm

Cutting Feed Rates:  833 ipm

ATC:  24 place, side mounted, double arm changer

Tool to tool time:  1.6 sec.

EQUIPPED WITH:

Color LCD screen, SS control, Macros, Quick Code Programming

Rigid tap

High speed machining

Look Ahead

Programmable coolant nozzle

Expanded Memory to 16 mg

4^th axis interface with drives

Chip Auger

Remote Jog Handle

SN:  40326 new 2/05, 38621 new 11/04 & missing 1 pocket, 41766 new 5/05

F.O.B. – Libertyville, Il                                                          $59,500.00 Each

Inquire: steve_mrgrungy@msn.com

2005 HAAS VF2 SS

20 HP

12,000 RPM

Cat #40 Taper

30" x 16" x 20" Travels

Stainless Control Panel

Programmable Coolant Nozzle

Rigid Tapping

4th Axis Ready

Chip Auger

* 2,129 Hours

PRICE:  $59,500 FOB                    Location:  ILLINOIS

Inquire: steve_mrgrungy@msn.com 

2004 HAAS VF2 SS

20 HP

12,000 RPM

Cat #40 Taper

24 Position Side Mount ATC

30" x 16" x 20" Travels

Stainless Control Panel

Programmable Coolant Nozzle

Rigid Tapping

4th Axis Ready

Chip Auger

* 1,950 Hours

PRICE:  $50,000                     Location:  CALIFORNIA

Inquire: steve_mrgrungy@msn.com

Machining Centers, Vertical
Machine Class: Used
Manufacturer: HAAS
Model: VF-3
Spec. & Desc.:
X:40 "   Y:20 "   Z:25 "   POWER:20 HP   RPM:7500    # ATC:20   

Chip Auger, Umbrella Type Tool Changer, 3.5" Floppy. 4th Axis Ready,

Rigid Tap, Extended Memory, Prog Coolant, Quick Code, Very low hours.

Inquire: steve_mrgrungy@msn.com

Click here for slideshow: http://s159.photobucket.com/albums/t142/stevehenry/CNC%20VMC/1995%20HAAS%20VF-3/?action=view&current=31565eb7.pbw

1995 Haas VF-3 Vertical Machining Center
X=40" or 1016mm
Y=20" or 508mm
Z=25" or635mm

STANDARD OPTIONS:
15HP, Two speed geared head, 230 ft-lbs torque
Heavy Duty Sheet Metal Enclosure
Fully Enclosed 20 Position ATC
12,500 lb Cast Iron Construction
Flood Coolant System
Fast Powerful Fanuc Compatible 32 Bit Control
500 Blocks per second execution speed
Helical Milling
Graphics Display
DNC & Background Editing
Pocket Milling & Bolt Hole Pattern Cycles
Automatic Power up and down
Help Functions
Tool Geometry & Wear Offsets - 100 Sets
Tool Life Management
Tool Load Monitor

ADDED OPTIONS:
Chip Conveyor
Programmable Coolant Nozzle
Rigid Tapping
Wired 4th Axis Drive (NO TABLE COMES WITH THIS)
Custom Macros
Coordinate Rotating & Scaling
Quick Code
Floppy Disk Drive
Block Processing Speed (1000 BPS)
Program Memory to 8250ft
10,000 RPM Spindle

$25,500.00 FOB Georgia USA

Inquire: steve_mrgrungy@msn.com

2006 HAAS VF4SS

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/CNC%20VMC/2006%20HAAS%20VF4SS/?action=view&current=52af1f92.pbw

Haas VF-4SS CNC Vertical Machine Center
**New 2006** ***Make Offer***
HRT 310-CNCB

***My customer needs to move this yesterday!! Please make a resonable offer***
***I am in need of inventory machines, if you have anything please let me know

General Specifications As Per Brochure

CNC Control: Haas
Table Size: 52" x 18"
Max. Table Load: 1,750 lbs
Travel:
X-Axis: 50"
Y-Axis: 20"
Z-Axis: 25"
Spindle Nose to Table Top: 4" - 29"
Spindle Taper: CAT 40
Spindle Motor: 12,000 RPM
Rapid Traverse Rates: 1400 IPM
Cutting Feed Rates: 833 IPM
Tool Changer: 24 Side Mount
Index Time Tool to Tool: 1.6 Sec
Index Time Chip to Chip: 2.2 Sec
Weight (Approx.): 13,480 lbs
Dimensions (Approx.): 118" x 110" x 124"
Equipped With (must be verified by buyer):
Programmable Coolant
Remote Jog Handle
Chip Auguer
4th Axis Prewire
=30 Hp
=12k spindle
=4th axis drive
=Hrt 310

Asking Price: $74,500.00

Inquire: steve_mrgrungy@msn.com

1998 HAAS VF4

VF-4 Haas Machining Center 1998.

This is a standard VF-4 right out of the play book. This machine has only 1800 running hours

7500 RPM spindle , x,y,z = 50" , 20' and 25" , rapid 710 IPM , rigid tapping , 4th axis inter face

chip conveyor, programmable coolant , 3.5 floppy disc drive with 1-meg memory.

Fly into South Bend , Indiana and we'll pick you up ! 

Machine in plant under power Midwest !

$53K  loaded on your truck.

Inquire: steve_mrgrungy@msn.com

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/CNC%20VMC/2002%20Mori%20NV5000/?action=view&current=d59a7997.pbw

Mori Seiki NV5000B/40 Vertical Machining Center (2002):

40"x20"x20", 30 HP, 12,000 RPM, 40 Taper, Nikken 4th Axis Rotary Table,

1000 PSI Coolant Through the Spindle and Chip Conveyor.      

TABLE SIZE .............................. 19.5" X 44"

TRAVELS 
X-AXIS...................................40"        
Y-AXIS...................................20"        
Z-AXIS...................................20"
FEED RATES (X/Y/Z)........................1650 IPM
DIST. FROM NOSE TO TABLE CENTER..........4.9" - 26"
MAX SPINDLE SPEEDS.......................to 12,000 RPM
SPINDLE MOTOR............................30 HP
TAPER....................................#40
AUTOMATIC TOOL CHANGER...................24 ATC
TOOL CHANGE TIME.........................1 SECOND
CHIP TO CHIP TIME........................2.6 SECONDS 

EQUIPPED WITH: 
MSG-501 CNC CONTROLS
NIKKEN 4TH AXIS ROTARY TABLE
1000 PSI COOLANT THROUGH THE SPINDLE - Cool Jet
CHIP CONVEYOR

HOURS: 3,919 POWER ON

$82,000 USD

Inquire: steve_mrgrungy@msn.com

2006 DECKEL MAHO DMU 125P DUOBLOCK  5 AXIS VERTICAL MACHINING CENTER
 
X - 49.2" TRAVEL (1250 mm)
Y - 39.37" TRAVEL (1000 mm)
Z - 39.37" TRAVEL (1000 mm)
A - 130 DEG.
B - 360 DEG.
HSK 100 SPINDLE & TOOL HOLDERS
SPINDLE SPEED: 15,000 RPM
RAPID TRAVERSE AND FEED RATES X,Y&Z: 2400 IPM
40 ATC: HOLDS 40 TOOLS
MAIN MOTOR: 120 HP
ELECTRICAL: 250 AMP, 400 VOLTS
 
*****EQUIPPED WITH:
SIEMENS 840 D CONTROL

(SIMPLE INTERACTIVE PROGRAMMING WITHOUT THE NEED FOR ADDITIONAL DOCUMENTATION)
THERE’S A 20.0" X 20.0" X 30.0" PRECISION MACHINED CAST IRON TOMBSTONE,

THAT GOES WITH THIS MACHINE.
 
CONDITION: ONE SHIFT MACHINE CUTTING ALUMINUM
 
VIDEO AVAILABLE: CALL 704-645-7058
 
LOCATION: WESTERN USA
$450,000.00

Inquire: steve_mrgrungy@msn.com

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/CNC%20Turning%20Center/2006%20Mori%20NL%202500/?action=view&current=1a2b6c72.pbw

Mori Seiki NL-2500Y/700 CNC Turning Center (2006)

Beautiful condition with very little use.

Live Tooling, Y axis, Bar feeder, (10) Chuck, Tailstock, Low Hours.                                                                                                                                  

Travel      
   X- Axis.....................................................10.2"
   Z- Axis.....................................................31.3"
   Y- Axis.....................................................+/- 2.0"
   B-Axis......................................................Yes

Capacity
Swing over bed.................................................36.4"
Swing over cross slide.........................................27.7"
Max. turning dia...............................................14"
Standard turning dia...........................................10.8"
Max. turning length............................................27.7"
Bar work capacity..............................................3.1"
 
Spindle
Max. spindle speed.............................................4,000
Spindle nose...................................................A2-8
Thr spindle hole dia...........................................3.6"
Spindle beaing inner dia.......................................5.5"

Turret     
# of tool stations.............................................12
Tool shank dia for boring bar..................................1"
Turret indexing time...........................................25 sec.
Max. rotary tool spindle speed.................................6,000

Feedrate     
Rapid Traverse     
   X..........................................................1181.1 in/min
   Z..........................................................1181.1 in/min
   Y..........................................................393.7 in/min
   B..........................................................275.6 in/min
   C (Spindle rpm)............................................400

Tailstock
Tailstock travel..............................................28.9"
Tailstock spindle dia.........................................3.1"
Taper hole of tailstock spindle...............................Live Center MT5

Tank Capacity
Coolant tank capacity.........................................70 gal.

Live Tooling:
7 Tools Total (6 Right Angle & 1 Adjustable)

Dimensions     
   W x L x H.................................................122.0" x 75.7" x 83.5"

   Weight Lbs (Kg)............................................13,420 (6,100)

Machine Hours:
Power On: 2,678
Cutting Hours: 1,710

Equipped With:
Standard Tooling Package of Boring Bars and Tool Holders
LNS Bar Feeder - Quickload Servo 53
Chip Conveyor, Parts Catcher

$152,000.00

Inquire: steve_mrgrungy@msn.com

MITSUBISHI 1996, MVS25A, CNC bridge type vertical machining center with Fanuc

KR32-D CNC control, 98.4” between columns, travels: X-axis (table longitudinal)-165.54”,

Y-axis (spindle head cross)-98.45”, Z-axis (cross rail vertical)-72.87”, 157.5” x 78.7”

table, 55,000 table weight capacity, 4000 RPM, 24-position ATC, CAT 50 taper, 35/30

hp motor, pendant control, s/n G3520

$345,000 USD

Inquire: steve_mrgrungy@msn.com

About 20 pictures available, please inquire.

1999 HAAS HS-1RP 4-AXIS HORIZONTAL MACHINING CENTER
SPECIFICATIONS:
NUMBER OF PALLETS                                          2
PALLET SIZE                                            16" X 16"
TABLE LOAD CAPACITY                                     880 LBS.
X - AXIS 24"
Y - AXIS 20"
Z - AXIS 22"
TABLE INDEXING                                                  CONTOURING
SPINDLE DRIVE MOTOR                                      20 HP AC SPINDLE
SPINDLE TAPER                                                     CAT 40
SPINDLE SPEEDS                                                   10,000 RPM
RAPID TRAVERSE RATE                                      710 IPM
AUTOMATIC TOOLCHANGER                            24 POSITIONS

EQUIPPED WITH:
30 HP VECTOR DRIVE
THRU SPINDLE COOLANT
CHIP AUGER
3.5 FLOPPY DISK DRIVE INTERFACE
4MB MEMORY
24-TOOL ATC
2-SPEED GEAR BOX
CUSTOM MACROS
QUICK CODE PROGRAMMING
COORDINATE ROTATION AND SCALING
REMOTE JOG HANDLE
BRUSHLESS SERVOS
FULL 4TH AXIS
RIGID TAPPING
CHIP AUGER

$69,500.00 Georgia USA

Inquire: steve_mrgrungy@msn.com

DOOSAN SUB-SPINDLE TWIN TURRET LIVE TOOL CNC LATHE
 MODEL Z340SM (STYLE-010), FANUC 18iTB
 with special Pro-Package see (Special) 
 
STANDARD SPECIFICATIONS
Max Turning Dia. 13.99", Length 24.80", Spindle Nose Distance: 33.86"
X1 and X2 axis: 7.28", Z1 and Z2 axis: 25.59", B axis: 24.41"
Note: Milling Diameter and Length is limited. Check detail Specification
Main Spindle
3,000rpm. with AC 25/30Hp Spindle (Full Power 509~3,000rpm, 261 ft-lbs Torque)
C1 axis Spindle control with Hydraulic Disk Brake
Sub Spindle
6,000rpm. with 25/30Hp Sub Spindle (Full Power 1,060~6,000rpm, 123 ft-lbs Torque) with full synchronized control.
C2 axis Spindle control with Hydraulic Disk Brake
B axis for Sub Spindle
Twin Live Tool Turrets
Two of Doosan 12 face, VDI 30 Live tool Turrets with Servo drive index.
3,000rpm. with 3.7Hp Live Tool
Included:
Spindle Air Blow, External (Special Value)
Coolant System 43psi (900 HMF on each Turret) (Special Value)
Door locking Limit Switch (CE type)
Tool & Work Counter (Special Value)
Part Catcher & Internal Part Ejector for Sub spindle (Special Value)
Part Conveyor to Right side (Max Part size: Dia 3" x 7" long) (Special Value)
Bar feeder interface (LNS ® Multi Magazine) (Special Value)
Memory 160M (525ft) (Special Value)
Absolute Encoders (Special Value)
Tool & Work Counter
Fanuc 18iTB with 7.2" Monochrome LCD
Polar Coordination System (Special Value)
Cylindrical Interpolation (Special Value)
Main Spindle Orientation
Sub Spindle Orientation
32 set offset
Registered Program no: 63ea
Custom Macro B with 600 Variables
Tool Life Management
Tool offset direct input (Manual TLM)
Optional Block skip I, II
G10, G30, G70s, G80s, G90, G92, G94
 
3-1.  STANDARD ACCESSORIES
Soft Jaws 1Set
2 Foot switches: Main Chuck open/close, Sub Chuck open/close
Automatic Oil Lubrication system
Work Lamp, Cycle finish Buzzer & Lamp
Hand toolbox, Leveling Pads & screws
Chip Conveyor Connector (DMA Standard, Chip Conveyor not included)
Safety Locking Door Limit switch
 

Regular Price New $290,000.+
Special Price  $134,900.00 FOB Georgia

Inquire: steve_mrgrungy@msn.com

Kennametal Boring Heads
HSK63ASV2B121M , brand new in box.

$1800 Each or offer for the lot.

Complete Specs Available !

Inquire: steve_mrgrungy@msn.com

Click here to view slide show: http://s159.photobucket.com/albums/t142/stevehenry/CNC%20VMC/1982%20Hitachi%20Seiki%20V50/?action=view&current=e9f72c70.pbw

This machine was never used for production.
It was in a toolroom environment and it is in "EXCELLENT" condition.
It is an early 80's machine.
FOB Erie Pennsylvania USA

Hitachi-Seiki VA 50
Ser # 5001
X AXIS 43"
Y AXIS 20"
Z AXIS 20" TRAVEL WITH 4TH AXIS + 20 TOOL CAROUSEL
No date.  Separate coolant tube.
220V 3ph.
36KVA
Fanuc System 6M controller

$8,500.00 FOB Erie PA

Contact: steve_mrgrungy@msn.com

Asking Price is $23,000 USD FOB Virginia.

This machine will be under power once the board is replaced.  Everything works but the power supply.
It is a 1982 model.  1982/11 to be exact. This machine came from a pharmaceutical company and was as clean inside and out as a hospital when purchased.  The company did not have time to wait for its repair when the power supply board failed so it bought and had a new HAAS machine delivered immediately.
Taper is a BT35

23.6 "
 
Y:
 16.14 "
 
Z:
 18.1 "
 
RPM:
 8,000
 
# ATC:
 20
 
Control:
 YASNAC I80

Many pictures available.

Contact: steve_mrgrungy@msn.com