6ft Giddings Lewis Bickford Radial Drill
MUST GO !!!! Reduced to $8,750.00 from $12,500.00 FOB Erie PA
Very good condition !
1969 5'11" Column Giddings & Lewis-Bickford "Chip Master" Radial Drill
Equipped with 10HP, 3 phase, 60Hz AC Main Motor and Controls.
Specifications:
Drills to the center of circle @ base 120" (3048mm)
Max distance spindle to base 54" (1372mm)
Min distance spindle to base 14" (356mm)
Spindle Travel 14" (356mm)
No. 5 Morse Taper in spindle
12 spindle speeds 60 to 2400 RPM
9 spindle feed .006 to .125 IPR
2 In Built Tap Leads 8 & 11 1/2 TPI
Working Surface of T-slotted Base 44" X 71" (1118 X 1803mm)
Overall height without skids 98" (2489mm)
Aprox Weight 12,000 lbs
Equipment:
Power Elevation, hydraulic power column clamping.
Power Rapid Traverse to head on arm.
Coolant System
Inquire: steve_mrgrungy@msn.com
1992 Mazak Super Turbo X510 CNC Laser
One (1) Pre-Owned Mazak Super Turbo X510 CNC Laser
General Info:
Year of Mfg: 1992 (Installed 1993)
Control: Mazatrol L32/CRT
Laser Output: 1,500 Watts
Working Area: 60" x 120"
Maximum Material Thickness: 3/8"
Equipped With:
X-Axis Stroke: 129.1"
Y-Axis Stroke: 62.0"
Z-Axis Stroke: 3.9
Max. Load Capacity: 957 Lbs.
Rapid Traverse, X&Y: 945 IPM
Max. Cutting Feed Rate: 788 IPM
Max Cutting Thickness: 0.47" Mild Steel
Electricity Required: 45KVA
Resonator Type: High Speed Coaxial Flow
Pulse Peak Output: 3000 Watt
Continuous Rated Output: 1500 Watt
Electricity Required: 22KVA
2- Position Pallet/Table Design
All Available Books & Manuals
Other Information:
1. Cost summaries for purchased parts and service for the last three years.
2. A Mazak service technician refurbishes the resonator every 4,000 run hours.
3. The mechanical booster pump lasts about 20,000 run hrs and was replaced in June 2007.
4. The air-cooled vacuum pump was replaced in June 2007.
That was the first time ever. Machine installed in 1993.
5. Replacement of mirrors and lenses are periodic maintenance items.
6. The y-axis ball screw was replaced August 2005.
7. One of the chip conveyor chains was replaced in 2005.
8. The machine has been packed, wrapped and prepped for immediate shipment.
INVESTMENT: $25,500.00 - Loading Included
Inquire: steve_mrgrungy@msn.com
1998 Amada Pulsar 2415
1 - USED AMADA PULSAR 2415 2000 WATT LASER
S/N: 12415368 MFG: 1998
TRAVEL METHOD X AXIS FOR WORK PIECE MOVEMENT
Y AXIS FOR CUTTING HEAD MOVEMENT
CONTROL METHOD X, Y & Z SIMULTANEOUS 3 AXIS CONTROL AND B AXIS
DRIVE MOTORS FANUC AC SERVO (X, Y, Z, AND B)
MAXIMUM SHEET SIZE 61" (Y) X 198" (X) WITH ONE REPOSITIONING CYCLE
MAXIMUM AXIS TRAVEL 61" (Y) X 99" (X) X 11.8" (Z) X 0.78" (B)
MAXIMUM CUTTING SPEED 787 IPM
MAXIMUM TABLE SPEED 3,149 IPM, PER AXIS (4,454/MIN, 45 DEG. VECTOR)
MAXIMUM SPEED Z-AXIS 787 IPM
POSITIONING ACCURACY +/- 0.0004"/20"
REPEATABILITY +/- 0.0004"
MAXIMUM MATERIAL WEIGHT 727 LBS. (5' X 10' X 3/8" OR 4' X 8' X 1/2")
NUMBER OF CLAMPS 3
WORK CHUTE 66" (Y) X 21" (X)
ASSIST GAS 4 PORTS, PART PROGRAM SELECTABLE
MACHINE SIZE 125.0" X 150.0" X 95.0"
MACHINE WEIGHT 18,700 LBS. INCLUDING LASER RESONATOR
ELECTRICAL REQUIREMENTS 208 VAC, 3 PHASE, 60 HZ, 10 KVA
TEMPORARY SPECIFICATIONS SUBJECT TO REVISION
PRICE - FOB TRUCK - NASHVILLE, TN $190,000.00
Inquire: steve_mrgrungy@msn.com
1999 Amada LC1212
1 - USED AMADA PULSAR 1212 2000 WATT LASER
WITH OPTICAL VERIFICATION SYSTEM
S/N: L99Z20148 MFG: 1999
TRAVEL METHOD X AXIS FOR WORK PIECE MOVEMENT
Y AXIS FOR CUTTING HEAD MOVEMENT
CONTROL METHOD X, Y & Z SIMULTANEOUS 3 AXIS CONTROL AND B AXIS
DRIVE MOTORS FANUC AC SERVO (X, Y Z, AND B)
MAXIMUM SHEET SIZE 50.0" (Y) X 100.0" (X) WITH ONE REPOSITIONING CYCLE
MAXIMUM AXIS TRAVEL 50.0" (Y) X 50.0" (X) X 11.8" (Z) X 0.78" (B)
MAXIMUM CUTTING SPEED 787 IPM
MAXIMUM TABLE SPEED 3,149 IPM, PER AXIS (4,454 IPM, 45 DEG. VECTOR)
MAXIMUM SPEED Z-AXIS 787 IPM
POSITIONING ACCURACY +/- 0.0004"/20"
REPEATABILITY +/- 0.0004"
MAXIMUM MATERIAL WEIGHT 484 LBS. (4' X 8' X 3/8" OR 4' X 6' X 1/2")
NUMBER OF CLAMPS 2 STANDARD SPECIFICATION
WORK CHUTE 66" (Y) X 21" (X)
ASSIST GAS 4 PORTS, PART PROGRAM SELECTABLE
MACHINE SIZE 125.0" X 150.0" X 95.0"
MACHINE WEIGHT 12,232 LBS. INCLUDING LASER RESONATOR
ELECTRICAL REQUIREMENTS 208 VAC, 3 PHASE, 60 HZ, 10 KVA
TEMPORARY SPECIFICATIONS SUBJECT TO REVISION
$180,000.00 USD
Inquire: steve_mrgrungy@msn.com
60W Shop Sabre 4896 CNC Router/Laser Combo
1 - USED SHOP SABRE 4896 CNC ROUTER TABLE WITH
FIRESTAR t60 LASER AND ROUTER HEAD
S/N: 27044896080806 MFG: 2006 Stock No: 087158
LASER................................... SYNRAD FIRESTAR t60 W/ UC-2000
LASER CONTROL
ROUTER.................................. GIORDARNO COLOMBO TYPE RV90/2, 5HP
VARIABLE SPEED TO 18,000 RPM @ 300 HZ
TO 24,000 RPM @ 400 HZ
DELTA VARIABLE FREQUENCY DRIVE
OPTICAL METROLOGY....................... OPTIMET MODEL EC-1000 3D LASER
DIGITIZING SCANNER
WORK AREA............................... 60" X 110"
CUTTING AREA............................ 60" X 97"
Z-AXIS CLEARANCE........................ 8"
Z-AXIS TRAVEL........................... 9"
CUTTING AND TRAVERSE SPEED.............. 600 IPM (AC SERVO OPTIONS)
WITH:
PRECISION BALL SCREWS ON ALL AXES
AIR BALANCER ON Z-AXIS
1 LIMIT SWITCH ON EACH AXIS
PC WITH RAMS3d AND MICROSYSTEMS OPERATING SOFTWARE
TEMPORARY SPECIFICATIONS SUBJECT TO REVISION
PRICE $52,500.00 USD FOB/CIF Nashville, TN, USA
Inquire: steve_mrgrungy@msn.com
Create a free website at Webs.com