10M x 2400mm Noble & Lund Lathe / Please Scroll Down
Maker : NOBLE & LUND
Swing---------------------------------------2400mm
Center Distance----------------------------10000mm
Width of Bed------------------------------ 1700mm
Work piece weight------------------------- 32 T
** Equipped With:
(2) Toolpost
$285,000.00 FOB South Korea
Inquire: steve_mrgrungy@msn.com
2000 Gurutzpe AT-600 CNC Lathe
31-1/2 x 120 cc Gurutzpe Flat Bed CNC Lathe, AT-600, 4 Bore,
8-Tool Turret, GE Fanuc O-T, 35 HP, 31 4-Jaw Chuck, Steady Rest,
Chip 2000,
$99,500.00 FOB Ohio
Inquire: steve_mrgrungy@msn.com
90 Sw x 400 CRAVEN LATHE (2286mm X 9753.60mm)
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Large%20Manual%20Lathes/90%20x%20400%20Craven/?action=view¤t=69024e54.pbw
90 Sw x 400 CRAVEN LATHE (2286mm X 9753.60mm)
Craven country origin ( UK. ) Year 1960.
Model : Heavy Duty Serial #17856
Specifications:
50 Ton Capacity without steadies
Maximum Swing Over Bed: 90
Maximum Swing Over Carriage 90
Length Between Centers: 33
Chuck Diameters (4-jaws) 66
Taper Slide Maximum: 48
Spindle Speeds: .5 - 102 RPM
Headstock Motor: 60 HP
4-Way Bed Construction
Motorized Tailstock
2 Carriages.
Feed Rates. ( 0.009 to 0.270" / rpm.)
New Headstock bearing recently installed.
For information Bed section 23'-1/12 " ( Headstock ). Bed section 25' - 8" ( Tail stock )
We have 2 Steadys rest 42" capacity roller bearing ( Heavy duty ).
Under Power.
Location Montreal, Canada Area.
Quill Diameter= 12 1/2" (317.500mm)
Bed Width= 11' (3352.80mm)
$295,000.00 USD CIF ANY PORT !
Inquire: steve_mrgrungy@msn.com
7M x 1650mm Craven Heavy Duty Lathe
CRAVEN Heavy Duty Roll Lathe
Swing over bed: 1650 mm,
swing over saddle: 1500 mm,
Distance between centres: 7000 mm,
4 Shear bed, Speeds: 0.5 to 50 rpm,
1250 mm dia 4 Jaw chuck on headstock & tailstock,
Powered tailstock,
50 Kw motor,
Carrying capacity 40 tons approx.
PRICE: USD 150,000.00
Inquire: steve_mrgrungy@msn.com
40" x 240" Cincinnati Lathe
Click here for slideshow: http://s159.photobucket.com/albums/t142/stevehenry/Large%20Manual%20Lathes/40%20x%20240%20Cincinnati/?action=view¤t=f195a961.pbw
Inquire: steve_mrgrungy@msn.com
50" X 51' Monarch Lathe / Please Scroll Down
ONE USED - 50 x 51 cc MONARCH Engine Lathe
Model: 32NN
Serial Number: 43146
50 Swing Over Bedways
36 Swing Over Cross Slide
Hardways
2 Carriages
Taper Attachment
Inch Threading
Spindle Speeds to 405 RPM
Power Rapid Traverse
44 Diameter Faceplate with Jaws
Chip Pans
Temporary specifications pending arrival of machine to warehouse in Aurora, IL.
Price machine loaded on truck, F.O.B. Aurora, IL .$ 249,500.00
Inquire: steve_mrgrungy@msn.com
98" Swing x 66" x 240" C/C Morando Lathe
Click here for slideshow: http://s159.photobucket.com/albums/t142/stevehenry/Large%20Manual%20Lathes/98%20x%2066%20x%20240%20Morando/?action=view¤t=8bf97cea.pbw
Large 98" swing x 240 " centers Lathe
Year: 1965
Make: Morando /Torino
Model: TUF-1
Condition: Very Good
Serial #: On Request
Machine Status: Under Power
Weight: 45,000
Dimension: L x W x H 33ft x 8ft x 7ft-8in
Swing over bed max -98"
max swing 66" over crosslide
center dist. 240" centers, 20ft
bed width-37-1/2"
speeds-2-120 RPM
soft start 50 HP motor-upgraded feature
3.5" spindle bore
rapid traverse on bed
4 jaw -55" dia.chuck
steady rest 30" cap
square ways
motorized tailstock
Metric threading w/ many inch change gears included
230/460/3 wired 460
Nice heavy duty machine, needs nothing has been gone through thoroughly...
Complete manuals with prints.
$79,750.00 Plus $3500 Rigging.
Inquire: steve_mrgrungy@msn.com
3150mm Swing X 12.5M Kramatorsk Lathe
Heavy lathe KZ16136.01F1 (3150x12500), KRAMATORSK
Price on FCA $589,500.00 USD. (Under Power, and in Use, Inspect Under Power)
Max. working diameter over bed 3150 mm
Max. working diameter over slide 2500 mm
Center-to-center distance 12500 mm
Rotary speed of the headstocks spindle 0,4 .80 min.-1
Threading:
Metric 2 .90 mm
Inch 12 3/8
thread cutting length 1000 mm
Weight-carrying ability of the opened
roller rest 50 t
Weight the workpiece 100 t
Inquire: steve_mrgrungy@msn.com
1996 Kramatorsk 2280mm X 12500mm CNC Lathe
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Large%20Manual%20Lathes/12-5M%20X%202280mm%20Kramatorsk%20CNC/?action=view¤t=f174c826.pbw
CNC HORIZONTAL HEAVY DUTY LATHE, model 1A670 (2280x12500), KRAMATORSK
Price : $775,000.00 USD EX-WORKS
Location - Sweden
YOM: 1967
Modernised 1996.
Swing 2280 mm.
Swing over saddle 1950 mm.
Turning lenght 12500 mm.
Inside turningram (tool) min/max turningdiameter 800/1600 mm.
Inside turninglenght 7000 mm.
Workpiece weight between centers 63 ton.
Spindelspeed 100 rpm.
Spindel power 125 kW.
2 worksupports with 2 pc CNC SIEMENS 840C, one on each support.
Tailstock.
Steadyrest.
Chipconveyer.
Under power and can be inspected.
More photos on demand.
Inquire: steve_mrgrungy@msn.com
64" X 42' Meuser Engine Lathe
ONE USED - 64 x 42 cc MEUSER Heavy Duty Engine Lathe
Serial Number: M65-45447
New 1974
64 Swing Over Bedways
48 Swing Over Cross Slide
80 Swing In Removable Gap
Hardways
Inch/Metric Threading
Spindle Speeds to 400 RPM
Inch Leadscrew
4.75 Hole thru Spindle
Power Compound for Taper Turning
Power Rapid Traverse
2 Steady Rests
Work Cradle
62 Diameter Faceplate with Jaws
Temporary specifications pending arrival of machine to warehouse in Aurora, IL.
Price machine loaded on truck, F.O.B. Aurora, IL
.$ 249,500.00
Inquire: steve_mrgrungy@msn.com
16" X 54" Monarch Engine Lathe
ONE (1) USED MONARCH 16" X 54" ENGINE LATHE
Model Number: K16, Serial Number: 49990 (1969)
STANDARD FEATURES AND EQUIPMENT:
3-Jaw Chuck
4-Jaw Chuck
Steady Rest
Face Plate
THERE IS NO TAPER ATTACHMENT
SPECIFICATIONS:
Swing Over Bed 16"
Distance Between Centers 54"
Spindle Speeds 28 to 1200 RPM
Spindle Bore 1-3/8"
Tailstock Taper MT 4
Spindle Type D1-6
ELECTRICS:
7.5 HP
Three Phase
220/440
Wired for 220 Volts
AS IS PRICE... . .......F.O.B. MEMPHIS.. .....$ 9450.00
Inquire: steve_mrgrungy@msn.com
24" X 72" Leblond Regal Engine Lathe
Leblond Regal 24" x 72" Geared Head Lathe
Serial Number: 3H901
Specifications:
Swing over carriage 26"
Swing over cross slide 18 1/4"
Distance between centers 72"
Servo shift spindle speeds 12
Spindle speed range 18 to 720
Hole thru spindle 2 3/16"
Spindle Nose L2
Feed changes 48
Feed range .0036 to 205 IPR
Thread changes 48
Thread range 2 - 112 threads per inch
Tailstock taper 5 morse taper
Motor 10 HP / 1800 RPM
Net weight 5995 pounds
Floor space required 144" x 60"
12" SCA Top Jaw 3 Jaw Chuck
18" 4 Jaw Chuck
23 1/2" Face Plate
7" Hole Steady Rest
Taper Attachment
PRICE . $9,000.00
Inquire: steve_mrgrungy@msn.com
56" X 216" Skoda Engine Lathe
ONE USED - 56 x 18 cc SKODA Engine Lathe
Model: SRM 125
Serial Number: 19410
New 1968
56 Swing Over Bedways
41 Swing Over Cross Slide
Hardways
Power Compound for Taper Turning
Inch/Metric Threading
Inch Leadscrew
Rapid Traverse
Spindle Speeds from 9 to 315 RPM
50 diameter 4 jaw chuck
3 steady rests
7 Tailstock Quill Diameter
43 Bed Width
Price machine on location Ohio Plant .. .$ 89,500.00
Inquire: steve_mrgrungy@msn.com
49 1/2" X 228" Monarch Engine Lathe
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Large%20Manual%20Lathes/49-5%20X%20158%20Monarch/?action=view¤t=f588c11c.pbw
MONARCH 49.5" X 228" ENGINE LATHE
GENERAL SPECIFICATIONS:
MANUFACTURER MONARCH
MODEL 36 NN
SERIAL# 25260
AGE APPROXIMATELY 1944
SWING 49.5"
SWING OVER CROSS SLIDE 36"
CENTER DISTANCE 228"
SPINDLE SPEED 42-202 RPM
SPINDLE BORE 2"
TWO SPEED MAIN MOTOR 25/12.5
EQUIPPED WITH:
INCH THREADING
2 STEADY RESTS
24" 4 JAW CHUCK
TAPER ATTACHMENT
BORING ATTACHMENT
$44,500.00 USD FOB
Inquire: steve_mrgrungy@msn.com
30" X 60" CNC Mori Seiki LL-7A Flat Bed Lathe
MORI SEIKI LL-7A CNC FLAT BED LATHE
SPECIFICATIONS:
Control ................................: Fanuc OT
Swing Over Bed..........................: 42.9"
Swing Over Cross Slide..................: 20.4"
X Axis Travel...........................: 26.5"
Distance Between Centers................: 100"
Z Axis Travel...........................: 99"
Spindle Speeds..........................: 8-1200 RPM
Spindle Bore............................: 4.2"
Spindle Nose............................: A2-11
Motor...................................: 50 HP
Machine Weight..........................: 25,000 LBS.
Equipped With:
Inquire: steve_mrgrungy@msn.com
(4) Position Front Turret
(6) Position Rear Turret Drum Type
40" Dia. 8-Jaw Power Chuck
PRICE....................: U.S. $ 72,500
40" X 220" Niles WMW Engine Lathe
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Large%20Manual%20Lathes/40%20X%20220%20Niles/?action=view¤t=7f2f4b9e.pbw
WMW Niles Engine Lathe
S/N: 1 100 15 37
40" Chuck
220" between centers.
The swing over cross slide is about 30"
The ways of this lathe are of the "hidden" type.
The lathe cuts threads, It has full length lead screw.
Price: $29,950.00 FOB: West Coast USA
Inquire: steve_mrgrungy@msn.com
26" X 264" Monarch Engine Lathe
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/XA/Monarch%2026%20X%20264/?action=view¤t=ade1bb21.pbw
26" x 264" cc (635mm X 6706mm) Monarch Lathe Model 2516, 12 To 1500 RPM, Hard Ways,
P.R.T. To Carriage, 15" 3-Jaw, Metric/Inch Threading, Apron Leadscrew Reverse, Steady Rest, 25 HP, 1965.
(1) One Used MONARCH , LATHE ENGINE
Serial No.: 47752 - Year: 1965
26"X264"MONARCH #2516,P.R.T.,3-JAW,STEADY REST,H-WAYS,1500 RPM...
____________________________________________________________________________
26" SWING OVER WAYS
16" SWING OVER CROSS SLIDE
264" MAX. CENTER DISTANCE
(36) SPEEDS: 12 TO 1500 RPM
2-1/16" HOLE THRU SPINDLE
6"-D1 CAMLOCK SPINDLE NOSE
FLAME HARDENED AND GROUND BED WAYS
4-WAY RAPID TRAVERSE TO CARRIAGE
(66) FEEDS AND THREADS: 2 TO 120 INCH, METRIC TRANSPOSING
GEARS FOR 78 THREADS AND FEEDS
APRON CONTROLLED LEAD SCREW REVERSE
FLOOR SPACE: 48" X 325"
WEIGHT: 20,000 LBS.
COMPLETE WITH 25 HP 440/3/60 MAIN DRIVE MOTOR, P.R.T. MOTOR,
ELECTRICAL CONTROLS, 15" DIA. 3-JAW CHUCK, STEADY REST, AND
COOLANT SYSTEM.
GENERAL CONDITION: GOOD OPERATING CONDITIONS
FOB.......................................CINCINNATI, OHIO
_____________________________Price $44,500.00 ___________________________________
Inquire: steve_mrgrungy@msn.com
59" X 65.6' Graffenstaden Lathe
59" X 65.6' (787.4") Graffenstaden Dual-Carriage Engine Lathe
59.06" (1.5 Meter) swing, 65.6' (20 Meter) centers, Dual carriage design
Specifications (Preliminary)
Swing over bed ways: 59.06" (1.5 meters)
Swing over cross slide: 43.31" (1.1 meters)
Distance between centers: 65.62' (20 meters)
Speed: 5 - 156 RPM
Main Motor Drive: 90 HP
Additional Features:
(2) Carriages, (4) Steady rests, Leadscrew for threading
**SPECIFICATIONS SUBJECT TO VERIFICATION**
Price $159,500.00
Inquire: steve_mrgrungy@msn.com
21" X 198" Monarch Engine Lathe
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/XA/Monarch%2021%20X%20198/?action=view¤t=0e4df2a7.pbw
21" x 198" cc Monarch Lathe Model 2013, 12 To 1500 RPM, Hard Ways, P.R.T. To Carriage, 15" 3-Jaw,
Taper Attachment, Metric/Inch Threading, Apron Leadscrew Reverse, Two Steadys, 1971.
(1) One Used MONARCH , LATHE ENGINE
Serial No.: 50500 - Year: 1971
21"X198"MONARCH #2013,P.R.T.,H-WAYS,1500 RPM,15"3-JAW,TAPER,20 HP
____________________________________________________________________________
21" SWING OVER WAYS
13" SWING OVER CROSS SLIDE
198" MAX. CENTER DISTANCE
(36) SPEEDS: 12 TO 1500 RPM
2-1/16" HOLE THRU SPINDLE
6"-D1 CAMLOCK SPINDLE NOSE
FLAMED HARDENED AND GROUND BED WAYS
4-WAY RAPID TRAVERSE TO CARRIAGE
4-WAY RAPID TRAVERSE TO CARRIAGE
(66) FEEDS AND THREADS: 2 TO 120 INCH, METRIC TRANSPOSING
GEARS FOR 78 THREADS AND FEEDS
APRON CONTROLLED LEAD SCREW REVERSE
FLOOR SPACE: 50" X 250
WEIGHT: 39,500 LBS.
COMPLETE WITH 20 HP 440/3/60 MAIN DRIVE MOTOR, P.R.T. MOTOR,
ELECTRICAL CONTROLS, 15" DIA. 3-JAW CHUCK, TAPER ATTACHMENT,
TWO STEADY RESTS, CARRIAGE STOP, AND COOLANT SYSTEM.
GENERAL CONDITION: GOOD OPERATING CONDITIONS
FOB.......................................CINCINNATI, OHIO
_____________________________Price $34,500.00 ___________________________________
Inquire: steve_mrgrungy@msn.com
1600mm X 6M Heavy Duty 2 Carriage CNC Lathe
MODEL DESCRIPTION
HEAVY DUTY CNC LATHE
CK61160 1600 กฟ 6000 mm
SWING OVER BED 1600 mm
SWING OVER CARRIAGE: 1250 mm
WIDTH OF BED 3 GUIDEWAYS: 1600 mm
DISTANCE BETWEEN CENTERS: 6000 mm
SUPPORT CAPACITY BEWTEEN CENTERS 35 TONS
DIAMETER OF SPINDLE IN THE FRONT BEARING: 380 mm
Spindle nose/taper in inner taper hole: 1:7; 120 mm
SPINDLE SPEED: 3 STEPS, 0.8 TO 160 RPM
POWER OF MAIN MOTOR: DC 75 KW
TURRET, 4 POSITIONINGS & VERTICAL TYPE
Travel of X-axis, Z-AXIS: 740 mm; 6000 mm
Torque of X & Z-axis servo motor: 41Nm
Feed speed of X, Z-axis: X: 0.1 TO 4000 mm/min; Z: 0.1 TO 6000 mm/min
Rapid traverse of X, Z-axis: X: 4000 mm/min; Z:6000 mm/min
Ball screw of X-axis (diameterฌถ): จช 50กฟ10
RACK AND GEARBOX OF Z-AXIS
Diameter of tailstock sleeve: 300 mm
Taper hole of tailstock sleeve: 1:7; 120 mm
Max. Movement of tailstock: 300 mm
CONTROL SYSTEM: SEIMENS 802D
BEDWAY: HARDENED & GROUND
ELECTRICAL POWER: 380V/3PH/50HZ
ACCESSORIES
FOUR JAWS CHUCK, DIA. OF 1600 mm
STEADY REST
WORK LIGHT
COOLANT SYSTEM
Foundation block and screw
DEAD CENTER
SPECIAL TOOLS
TECHNICAL DOCUMENT
OPTIONAL ATTACHMENTฃจRMBฃฉ
ROLLER SUPPORT 3.5ุฒ๊ช
LINEAR ENCODER 6.5ุฒ๊ช
CONVEYOR, LENGTH 6 METERS 5.3ุฒ๊ช
Full 1-Year Parts and Labor Warranty on Machine
Full 2-Year Parts and Labor Warranty on CNC Control,
usually 1.5 year from Fanuc.
Delivered Port of New York USA CIF $500,000.00 USD
Inquire: steve_mrgrungy@msn.com
Various Engine Lathes
(1) One Used MONARCH , LATHE ENGINE
Serial No.: 10419 - Year: 1941
18"X78"MONARCH,H-WAYS,850 RPM,3-JAW,TAPER,COOLANT................
____________________________________________________________________________
18-1/2" ACTUAL SWING OVER BED WAYS
11" MAX. SWING OVER CROSS SLIDE
78" MAX. DISTANCE BETWEEN CENTERS
(16) SPEEDS: 20 TO 850 RPM
(60) FEEDS: .0028 TO .1683 IPR
(60) THREADS: 2 TO 120 TPI
1-9/16" HOLE THRU SPINDLE
D1-6 CAMLOCK SPINDLE NOSE
FLAME HARDENED BED WAYS
FLOOR SPACE: 50" X 150"
WEIGHT: 5,000 LBS.
COMPLETE WITH 5 HP 220/440/3/60 MAIN DRIVE MOTOR, ELECTRICAL
CONTROLS, 10" DIA. 3-JAW CHUCK, TAPER ATTACHMENT, CHIP PAN,
TRAV-A-DIAL AND COOLANT SYSTEM.
GENERAL CONDITION: CLEANED, PAINTED AND CYCLED
FOB.......................................CINCINNATI, OHIO
_____________________________Price $2,950.00 ___________________________________
Inquire: steve_mrgrungy@msn.com
(1) LeBlond Regal Engine Lathe
S/N 11C875
SPECIFICATIONS:
19 x 96 Capacity
3 ฝ Spindle Bore (Inch & Metric)
1600 RPM
Dial Type
4-Way Tool Post
Quick Change
Steady Rest w/Roller
Standard Steady Rest
3 & 4 Jaw Chuck
Taper attachment
Face Plates
Hardened Ways
EXCELLENT CONDITION
PRICE ON LOCATION: .$13,500.00
Inquire: steve_mrgrungy@msn.com
ENGINE LATHE
MFG. "LODGE & SHIPLEY"
MODEL 2013 POWER TURN
POWER SHIFT PRESELECTOR
20-1/2" SWING OVER BED
13" SWING OVER CROSSLIDE
78" CENTERS
2" SPINDLE HOLE
4 WAY TOOL POST
COOLANT PUMP
WITH 3 AND 4 JAW CHUCK
STEADY REST
1967
PRICE F.O.B. MIAMI.........$8,500.00
Inquire: steve_mrgrungy@msn.com
Chubu Koki Lathe model LL 1500
Made in Japan
24" over bed
36" in gap
60" bc
Comes with 4 jaw chuck
$12,000.00 USD FOB
Inquire: steve_mrgrungy@msn.com
55" X 168" Ravensburg
One Use 55 x 168 cc RAVENSBURG Engine Lathe
Model: K36
Serial Number: 8950
New 1976
55 Swing Over Bedways
41 Swing Over Cross Slide
Hardways
Spindle Speeds from 2.8 to 255 RPM
3 Spindle thru Hole
6 Quill Diameter
31 Diameter 4-Jaw Chuck
28 Capacity Steady Rest
Tracer Attachment
Standard Compound w/Quick Change Toolpost
Pendant Control
Loaded on truck, F.O.B. Aurora, IL .$ 49,500.00
Inquire: steve_mrgrungy@msn.com
2006 Doosan Z340SM (Style-010)
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/CNC%20Lathes/2006%20Doosan/?action=view¤t=8cdb1289.pbw
Used Doosan Mecatec Z340SM w/Low Hours
DOOSAN TWO SPINDLE TWIN TURRET LIVE TOOL CNC LATHE
MODEL Z340SM (STYLE-010), FANUC 18iTB
with special Pro-Package
STANDARD SPECIFICATIONS
Max Turning Dia. 13.99
Length 24.80
Spindle Nose Distance: 33.86
X1 and X2 axis: 7.28
Z1 and Z2 axis: 25.59
B axis: 24.41
Main Spindle 3,000rpm. with AC 25/30Hp Spindle
(Full Power 509~3,000rpm, 261 ft-lbs Torque)
C1 axis Spindle control with Hydraulic Disk Brake
Sub Spindle 6,000rpm. with 25/30Hp Sub Spindle
(Full Power 1,060~6,000rpm, 123 ft-lbs Torque) with full
synchronized control.
C2 axis Spindle control with Hydraulic Disk Brake
B axis for Sub Spindle
Twin Live Tool Turrets
Two of Doosan 12 face, VDI 30 Live tool Turrets with Servo drive index.
3,000rpm. with 3.7Hp Live Tool
Included:
Spindle Air Blow, External
Coolant System 43psi (900 HMF on each Turret)
Door locking Limit Switch (CE type)
Tool & Work Counter (Special Value)
Part Catcher & Internal Part Ejector for Sub spindle
Part Conveyor to Right side (Max Part size: Dia 3 x 7 long)
Bar feeder interface (LNS ฎ Multi Magazine)
Memory 160M (525ft)
Absolute Encoders
Tool & Work Counter
Fanuc 18iTB with 7.2" Monochrome LCD
Polar Coordination System
Cylindrical Interpolation
Main Spindle Orientation
Sub Spindle Orientation
32 set offset
Registered Program no: 63ea
Custom Macro B with 600 Variables
Tool Life Management
Tool offset direct input (Manual TLM)
McDaniel Machinery, Inc.
For Quality & Accurate Machine Tools
Optional Block skip I, II
G10, G30, G70s, G80s, G90, G92, G94
3-1. STANDARD ACCESSORIES
Soft Jaws 1Set
2 Foot switches: Main Chuck open/close, Sub Chuck open/close
Automatic Oil Lubrication system
Work Lamp, Cycle finish Buzzer & Lamp
Hand toolbox, Leveling Pads & screws
Chip Conveyor Connector (DMA Standard, Chip Conveyor not included)
Safety Locking Door Limit switch.
$134,900.00 USD FOB Alabama
Inquire: steve_mrgrungy@msn.com
52" X 168" Gap Bed Lathe Poreba
Poreba Gap Bed Engine Lathe
Poreba TR135B
Year: 1977
Asking Price: $60,000
|
Specification |
Description |
|
Swing |
53" |
|
Swing in Gap |
63" |
|
Length of Gap |
|
|
Swing Over Cross Slide/carriage |
41.5" |
|
Distance Between Centers |
168" |
|
Tailstock Quill Stroke |
300mm |
|
Maximum Spindle Speed |
800 RPM |
|
Spindle Hole |
4.75 |
|
Spindle Nose |
A1-15 |
|
Main Motor (HP) |
60 HP |
|
Chuck (1) |
36 dia. |
|
Chuck (2) |
60 dia. |
|
Number of Jaws |
4" |
|
Threading |
Inch/ Metric |
|
Taper Attachment |
No |
|
Work Piece Weight |
9,000 14,000 Kg |
|
| |
|
Dimensions |
7 x 2.4 x 2.2M |
|
Approx.Weight |
12.5 tons |
Equipped With:
(1)36 dia. Steady Rest ( Shop made)
Tail Stock, Tool Carriage
Power Rapids
ท (1) 32 dia. 4-Jaw Chuck
ท (1) 58 dia. 4-Jaw Chuck
ท Misc. Tooling & Boring Bars
Inquire: steve_mrgrungy@msn.com
196.8" X 39" Niles Engine Lathe 1962
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Large%20Manual%20Lathes/1962%20Niles/?action=view¤t=3c1e2e8e.pbw
39" x 196.8" NILES ENGINE LATHE, 1962
MODEL: DLZ1000III5000
S/N: 110015.33
TOTAL WEIGHT: 14,4 TONS
VIDEO AT: http://www.youtube.com/watch?v=mjd18s2QxdI
PRICE: $ 45,000.00 USD EXW ONTARIO, CANADA
Inquire: steve_mrgrungy@msn.com
American 24" X 240" Lathe
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Large%20Manual%20Lathes/6M%20X%2024%20Inch%20American/?action=view¤t=97014527.pbw
American 24" x 240" Lathe
Swing: 24"
Between Centers: 240"
9" From Cross Slide to The Spindle Hole
15 HP, 1740 RPM Motor
2-1/2" Spindle Hole
11-450 RPM
Inch Threading
Equipped With:
8" Steady Rest
12" Steady Rest
18" Steady Rest
18" 3-Jaw Chuck
21" 4-Jaw Chuck
23" Face Plate
Tool Post
Taper Attachment Size: 7' X 29'
$24,500.00
FOB: Arkansas USA
Inquire: steve_mrgrungy@msn.com