#KBL-1/2 MUBEA UNIVERSAL MECHANICAL IRONWORKER
New 1960, Serial No 133/5125/10, Model KBL-1/2,
  Series KBL-13,
 
EQUIPPED WITH:
Rectangular Coper & Notcher Attachment
Plate Shear - Section Shear - Punch
 
CATALOGUE SPECIFICATIONS:
Tonnage Capacity, Punch End............ 55 TON
Stroke, Punch End...................... 15/16"
Throat Depth........................... 15.75"
Punching Capacity thru 5/8" Plate...... 1"
Punching Capacity thru 3/4" Plate...... 3/4"
Shearing Capacity, 90-Degree Angles.... 4" x 4" x 1/2"
Shearing Capacity, 45-Degree Angles.... 4" x 4" x 1/2"
Shearing Capacity, Tees................ 5" x 1/2"
Coping Capacity, Plates................ 9/16"
Coping Capacity, Angles & Tees......... 3" x 3" x 3/8"
Notching Capacity, Angles & Tees....... 3.5" x 3.5" x 7/16"
Notching Capacity, Beam Flanges........ 5 - 8
Notching Capacity, Channel Flanges..... 6 - 8
Notching Capacity, Depth............... 2.75"
Notching Capacity, Plates.............. 9/16"
Strokes Per Minute..................... 46 SPM
Overall Dimensions, L x W.............. 5'7" x 2'4"
Overall Height......................... 5'7"
Weight, Approximately.................. 5425 LBS
 
PRICE:  F.O.B.  WAREHOUSE........... $5,950.00

Inquire: steve_mrgrungy@msn.com

58 TON  HYDRAULIC IRONWORKER
MODEL 4        S/N 800478205       MFG 1980

 GENERAL SPECS:
STROKE ......................... 1" ADJ.
SPM @ 1/2" STROKE .............. 60
THROAT DEPTH ................... 20"

PUNCHING:
RATED TONNAGE................... 58 TON
PUNCHING CAPACITY............... 1-1/16" ROUND DIAMETER
                                  THRU 11/16" THK MILD STEEL
DIAMETER THRU MAX THICKNESS .... 1" THRU 3/4" THK MILD STEEL

SHEARING:
ANGLE SHEAR CAPACITY AT 90 DEG.. 4" X 4" X 1/2"
ANGLE SHEAR CAPACITY AT 45 DEG.. 3" X 3" X 5/16" (MITER)
FLAT SHEAR CAPACITY............. 7" LENGTH X 5/8" THICK OR
                                  8" LENGTH X 1/2" THICK OR
                                  8-1/2" LENGTH X 3/8"
TEES ........................... 3" X 3" X 3/8"
SOLID ROUND BAR CAPACITY........ 1-3/4"
SQUARE BAR CAPACITY............. 1-1/2"

SHEARING END COPING:
SQUARE NOTCH ................... 2-3/4" X 2-3/4" X 3/8"
90 DEG. COPE ................... 3-2/4" X 4" X 3/8"
FLANGES OF BEAMS & CHANNELS .... 4" - 7"

EQUIPPED WITH:
MISC. PUNCHES AND DIES
DUAL FOOT PEDAL
WORK LIGHT

WEIGHT: 6,500 LBS.

Price: $9,500

Inquire: steve_mrgrungy@msn.com

ONE (1) USED                                                                                   
                        60 TON DURMA DUAL CYL. IRONWORKER
 
 SERIAL NUMBER: 662002030                                                                       
 MAKE: DURMA
 TON: 60
 YEAR: 2002
 S/N: 662002030
 Model IW 55 Dual Cylinder
 
 Punching
 Rated Capacity:     60tons
 DIAMETER X THICKNESS  1-1/2 X 3/8
                        3/4 X 3/4
 MAXIMUM HOLD DIAMETER    1-1/2
 MAXIMUM STROKE LENGTH    2-3/8
 SPM3/4" STROKE            37
 THROAT DEPTH              10
 WORKING HEIGHT            42-1/2
 
 NOTCHING
 MATERIAL THICKNESS       3/8
 WIDTH                    1-5/8
 DEPTH                    3-1/2
 
 FLAT BAR SHEAR         
 MAX CAPACITY             12 X 5/8
                           8 X 3/4
 WORKING HEIGHT            35
 
 ANGLE SHEAR
 AT 90 DEGREES             4 X 4 X 1/2
 WORKING HEIGHT            43-1/4
 
 BAR SHEAR
 ROUND                     1-9/16
 SQUARE                    1-9/16
 
 
 DIMENSIONS
 MOTOR                      7.4 HP
 LENGTH                      64"
 HEIGHT                      71"
 WIDTH                       58"
 WEIGHT                      3,000LBS
                                                        PRICE: $10,000.00; F.O.B. SANTA PAULA, California 

Inquire: steve_mrgrungy@msn.com    
 

ONE - USED METAL MUNCHER IRON WORKER
MODEL MM70-18  S/N  073270498  (1998)
Specifications:  (at 65,000 PSI tensile)
Punch capacity: 70 tons (1-9/16” x  1/2”, 1" thru 7/8" mild steel)
Throat depth: 18"
Throat height: 18"
Punch stroke: 0-9”
Strokes per minute: 40 at 1/2"
Platen size: 11" x 48"
Round bar shear thickness: 1-3/8" diameter (optional)
Square bar shear thickness: 1-1/4" (optional)
Shear capacity: 1" x 7",  3/4 x 12",  3/8 x 20",  1/4 x 24"
Standard angle shear: 4" x 4" x 3/8"
Standard coping square notch: 3" x 3" x 3/8"
Motor: 7.5 HP
Electrics: 220/440/3/60
Net weight: 5,600 lbs.
Dimensions: 98” l x 48” w x 78” high

Features and Standard Equipment:
• Five built in work stations
• Two cylinders, independently controlled for two man operation
• Punch has fully automatic cycle and can be inched, stopped or reversed at any time
• Solid piston ram with 0-9" stroke for punching, bending, pressing, etc.
• Stripper is adjustable for height
• Press brake bending depth is micro switch controlled
• Quiet, high speed, direct drive hydraulic pump with pressure gauge

Equipped with:
• 13 set of misc punches and dies
• 36” Press Brake tool & 4-way die
• Misc press brake tooling

PRICE:   $14,500.00  Replacement cost approx $29K
F.O.B.:   Warren, MI
DELIVERY: Stock, Subject to prior sale

Inquire: steve_mrgrungy@msn.com

ONE Preowned EDWARDS PUNCH-SHEARS, IRONWORKER                             
     MODEL JAWS IV, YEAR 2001                                                  

     CAPACITY: 75 TON                                 

     HYDRAULIC, SINGLE CYLINDER, IRON WORKER                         
     CAPACITY.........................75 TON                         
     FLAT BAR SHEARING................1/2"X14"; 3/4"X10" MAX. CAP.   
     SQ. & ROUND BAR..................1.25" MAX CAP.                 
     ANGLE SHEARING...................5X5"X3/8" MAX. CAP.            
     COPING/NOTCHING..................2 1/2"X5"X1/2"                 
     THROAT DEPTH AT PUNCH............10"                            
     OPEN HEIGHT......................8 3/4"                         
     SHUT HEIGHT......................6 7/8"                         
     STROKE...........................1 5/8"                         
     ASSORTED TOLLING INCLUDING PIPE NOTCHER                         
     APPROX. WEIGHT...................3,250                          
     APPROX. DIMENSIONS...............44"X38"X60"H                   
     MOTOR: 5                                         
     ELECTRICS: 208/240/3/60                          
     CONDITION: V. GOOD                               

     PRICE: LOADED ON TRUCK...................................    $9,500.00

Inquire: steve_mrgrungy@msn.com

One Preowned Uni-Hydro Hydraulic Ironworker

Model 95-24 
Year 1990

Specifications:
Tonnage: 95
Throat depth: 14"
Punch: 1-3/16" hole thru 1" - 2" hole thru 9/16"
Bar shear: 1" x 8", 3/4" x 12", 1/2" x 20", 1/4" x 24"
Angle shear (90 degree/slug type): 6" x 6" x 1/2"
Strokes/minute light material: 40
Strokes/minute at max capacity: 8
Motor: 7-1/2 HP, 3 Phase
Dimensions: 35" W x 77-1/2" L x 88-1/2" H
Approximate weight: 6,950 lbs

Equipped with:
Manual punch aligner
Machine is in good condition
Hydraulic power unit less than one year use
New pins in bushings through out the machine

Price: $14,500.00 F.O.B.: Little Rock, Arkansas

Inquire: steve_mrgrungy@msn.com

This unit was completely rebuilt by Geka in 2004

Specifications

Angle Shear:

• "Non-deform cut" with no material lose
• Angles square: 6" x 6" x 1/2"
• Angles on 45 degree mitre (leg in): 3" x 3" x 5/16"
• Bar Shear:
• Channel: 3"
• Channel: 4"
• Plate Shear:
• "Non-deform cut" with no material lose
• Flat bar: 24" x 5/8" or 16" x 3/4" or 12" x 1"
• Blade length: 24"

Punch:

• Capacity: 110 Tons
• Punching capacity: 1-1/2" thru 3/4" - 1-5/16" thru 1"
• Throat depth: 12"
• Quick change punch holder
• Full stroke or jog mode
• Notcher:
• Thickness: 1/2"
• Depth: 3-1/2"
• Width: 2"

Equipped With:

• Section shear blades for angles with patented non-deform cutting action,
• with capability of cutting equal and unequal leg angles,
• at both 90 and 45 degress (leg in only).
• Bar shear blades for 3" & 4" Channel
• Flat bar blades (non-deform)
• Rectangular coper notcher
• Two-cylinder operation with two remote foot pedals and with hydraulics,
• which will allow simultaneous operation (Independently controlled) of punch,
• and shearing stations (both cylinders) to the total operating tonnage of machine.
• Quick changle punch holder, keyed for shaped tooling
• Support and mitre table for plate shear
• A structural die holder is provided to allow the punching of the flanges in channels,
• and I-Beams

Price:   $16,500.00 FOB your truck

We are pleased to offer the following USED (2001 Year) Geka Hydracrop,

 Model 110A,  Hydraulic Ironworker.

 Capacities in mild steel:

Angle Shear:

¨      “Non-deform cut” with no material loss

¨      Angles square - 6” x 6” x 1/2”

¨      Angles on 45” miter (leg in) - 3” x 3” x 5/16”

  Channel Shear:

¨      3” 4.1 pound

¨      4” 5.4 pound

  Plate Shear:

¨      “Non-deform cut” with no material loss

¨      Flat Bar - 24” x 5/8” or 16” x 3/4” or 12” x 1”

¨      Blade Length - 24”

   Punch:

¨      Capacity (tons) -  120

¨      Punching capacity - 1-1/4” through 1” or 1-1/2” through 3/4”                                                       

¨      Throat depth - 12”

¨      Quick change punch holder

¨      Full stroke or jog mode

 Notcher:

¨      Thickness - 1/2”

¨      Depth - 3-1/2

¨      3/60/220/440 motor and controls.  Low voltage at the controls

    Optional equipment Included:

1 each - Productivity Package to include a machine punch gauging table,

with,

X-Y scales and back stop, a machine notcher gauging table with

X-Y scales and back stop, a work light, and a 40” calibrated electric

length gauge to allow operator to set stop and feed material to stop

and have machine cycle automatically.

Price on Geka Hydracrop 110A----------------------------- $21,500.00 

F.O.B. Louisville Warehouse

Inquire: steve_mrgrungy@msn.com

132 Ton Peddinghaus Mechanical Ironworker Model Super 210/AD25

Capacity ............................ 132 TON

PUNCHING:
  Hole Diameter x Thickness ......... 1 3/16" X 1-1/8" OR 1-1/2" X 1"
  Length of Stroke .................. 1 ½"
  Depth of Throat (APPROX)........... 30"
  Speed of Punch (APPROX)............ 48 S.P.M.
ANGLE SHEAR:
  @ 90 Degrees ...................... 7" X 7" X 7/8"
  @ 45 DEGREES ...................... 4" X 4" X 5/8"
BAR CUTTER:
  ROUND - 2 9/16" ................... (SQUARE) 2 1/8"
  Tees @ 90 Degrees ................. 7" X 7" X 5/8"
  Tees @ 45 Degrees ................. 4 5/16" X 4 5/16" 9/16"
SHEAR:
  Length of Knives .................. 14"
  Plates (1") ....................... FLATS 8" X 1 1/8"

PRICE....................: U.S. $ 17,500

Inquire: steve_mrgrungy@msn.com