Erie Machine Tool

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Hones/Century%2020%20X%2010ft/?action=view&current=092ac597.pbw

508mm x 3048mm (20" x 120") Horizontal Hone

Century model # 74H-10 Horizontal Hone, late 70's vintage. 

The machine is not currently under power and is separated in two pieces for storage reasons

(508mm) 20" diameter work piece capacity

(3048mm) 10' stroke length

20 hp drive head motor

10 hp hydraulic pump motor (travel motor)

8 speed drive head (28 to 269 rpm)

Comes with all the tooling they were using with it.

This Hone was working up until the time of disconnect.

$29,500.00 FOB Wyoming 

Inquire: steve_mrgrungy@msn.com

$9,500.00 FOB Louisiana

Inquire: steve_mrgrungy@msn.com

50 HP Mattison Grinder
Manufacturer: Mattison Hanchett
Model: 400
24” x 120” table
Serial Number: 400-2189
Year: 1956

The grinder and milling machine are fully operational.

$19,500.00 USD FOB Buffalo, New York

Inquire: steve_mrgrungy@msn.com

Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Belt%20Sanders/52%20Inch%20Time%20Saver%20Dry/?action=view&current=fd7e71d7.pbw

Timesaver
Model:  352 M1
Serial # 6867
240V/3ph/60Hz

This is a dry type machine for metal,
has one head, 1~40HP motor,
it was working when we disconnected it,
and the extra belt has never been used.
$5,000.00 FOB

Inquire: steve_mrgrungy@msn.com

Click here for slideshow: http://s159.photobucket.com/albums/t142/stevehenry/Grinder%20Tool%20Cutter/Cincinnati%202/?action=view&current=52399b6e.pbw

Cincinnati Tool and Cutter Grinder #2
1964
Cimtrol Control

Serial # 6D1P5P-26
220V 3PH 60Hz

$3,700.00 FOB Erie, PA

Inquire: steve_mrgrungy@msn.com

APPROX YEAR (1965)
Mattison Rotary Surface Grinder
MODEL 60 SERIAL# 60-29
84" CHUCK 1/2" LIFE ON CHUCK
96" SWING INSIDE GAURDS
44", 10 SEGMENT WHEEL
36" UNDER WHEEL
SPINDLE 125 HP
TOTAL HP 159.5
TRABON LUBE SYSTEM
SOLID STATE TIMER
BUILT IN SOFT START
UNDER POWER IN
MICHIGAN

$75,500.00 FOB Michigan

steve_mrgrungy@msn.com

Mattison Rotary Surface Grinder
Manufacturer: Mattison
Model:
Control:
Year: 1979
Condition: Good
Specifications:
Maximum Chuck Diameter 48"
Maximum Swing Inside Guards 65"
Maximum Height Under Wheel 24"
Size 24"
Type Segmented
Main Motor 100 HP
Table Motor HP.
Coolant Motor HP.
Floor Space 144" X 84" Grinder Only
Type (Magnetic or T-slot) Magnetic
Thickness 9/16"
Height
Weight
Equipped With:
Hydromation Filtration Systems
F.O.B.: TN
PRICE …………………. $55,000.00

Inquire: steve_mrgrungy@msn.com

Click here for slide show 1: http://s159.photobucket.com/albums/t142/stevehenry/Roll%20Grinders/Churchill/?action=view&current=fa51c216.pbw

Click here for slide show 2: http://s159.photobucket.com/albums/t142/stevehenry/Roll%20Grinders/Churchill/?action=view&current=b230b1bc.pbw

(72”=1828.80mm) x (26'=7924.80mm) Churchill Roll Grinder
Model TWR
They purchased this machine from an auction.
It was in operation at the time.
Once they received part of the machine, they determined it would not work for there application,
.PDF prints available. 

$95,000.00 AS IS WERE IS

Inquire: steve_mrgrungy@msn.com

14" x 168" Landis Type "C" Plain Cylindrical Grinder, 30" x 3" Wheel, Three Steadys, DRO, 1942,
(1) One Used  LANDIS , GRINDER OD PLAIN
        Serial No.: 24692 - Year:  1942

       14"X 168"LANDIS TYPE "C",HYDRAULIC,30"X3"WHEEL,DRO,STEADYS.......
____________________________________________________________________________

       168" MAX. CENTER DISTANCE
       14-3/4" MAX. WORK SWING
       3 TO 120 IPM VARIABLE HYDRAULIC TABLE SPEEDS
       30" X 3" STANDARD GRINDING WHEEL
       AUTOMATIC PICK INFEED TO WHEELHEAD
       SWIVEL TABLE
       810 & 1060 RPM GRINDING WHEEL SPINDLE SPEEDS
       JARNO TAPER IN WORKHEAD/TAILSTOCK
       14 WORK CENTER TAPER
       (4) WORK SPEEDS:  51 TO 140 RPM
       FLOOR SPACE REQUIRED:  7'6" X 34'
       WEIGHT:                28,000 LBS.
       COMPLETE WITH 15 HP 220/440/3/60/1200 RPM MAIN DRIVE MOTOR,
         1 HP 220/440/3/60/1200 RPM WORKHEAD MOTOR, 5 HP 220/440/3/60
         HYDRAULIC MOTOR, ELECTRICAL CONTROLS, COOLANT SYSTEM, (3)
         FOLLOW RESTS, AND DRO.

       GENERAL CONDITION: GOOD CONDITION - AS TAKEN FROM SERVICE
       FOB.......................................CINCINNATI, OHIO
_____________________________Price  $29,500

Inquire: steve_mrgrungy@msn.com

Cincinnati 14 x 120 (355.60 X 3048mm) Plain s/n 1P4U1T-1 (New Electrics)

Landis 18 X 96 (457.200 X 2438.40mm) Type CH  s/n 383-38

$39,500.00 USD FOB each.

Inquire: steve_mrgrungy@msn.com

1940s/99 Gallmeyer & Livingston(Grand Rapids) Mdl. F 24" x 96"

Specifications:
Grinding Capacity:
Length 96 "
Width 24 "
Grinding Wheel Diameter 20 "
Motor 30 hp

Additional Spec's:
Maximum Distance Under 20" Wheel: 25"
Vertical Movement of Wheelhead: 30"
Automatic Traverse of Head: 24"
Hydraulic Motor: 20 HP
Coolant Motor: 1/4 HP
Vertical Head Motor: 3/4 HP
Machine Weight(approx): 28,000 Lbs.

Equipped With:
Mdl. 2T1 Neutrifier
Coolant Separation Tank
*Reconditioned 1999
 
Price:  $37,000.00 USD FOB Georgia, USA.

Inquire: steve_mrgrungy@msn.com

36" X 144" MATTISON HYDRAULIC-FEED
CNC HORIZONTAL-SPINDLE SURFACE GRINDER
New 1994 with Fanuc OG Control
FULL 3 Axis
 
EQUIPPED WITH:
(3) 36" X 48" Electro-Magnetic Chucks w/Neutrofier
Over-The-Wheel Dresser
Overflow-Style Coolant System
CNC Controlled Wheel Dressing 
 
CATALOGUE SPECIFICATIONS:
Table Dimensions (Overall) W X L 36" X 146"
Table Working Surface, W X L 36" X 144"
Grinding Width Capacity, Maximum 36"
Grinding Length Capacity, Maximum 144"
Height Under 20" Grinding Wheel 36"
Table Longitudinal, Power 144"
Wheelhead Cross Travel 36"
Grinding Wheel Diameter, Standard 20"
Grinding Wheel Width, Up to 6"
Grinding Wheel Spindle Motor 30/40 HP
Electrical System 220-440/3/60
Overall Dimensions, L X D 41' X 19 '
Overall Height 11'
Weight, Approximately 54000 LBS

Price - $180,000 USD CIF any port !

Many pictures are available.

Inquire: steve_mrgrungy@msn.com

Diamond rotary face grinder
90”x 24” T-slotted table
Segment type wheel grinding head.
Machine was rebuilt 20 years ago,
by a company called Re- Machine.
Has a DRO on the wheel dresser.
This machine was used to grind the bottom of Troyke rotary tables.
This is in very good running condition, they quit making the product it was used for.
We have estimated the weight @ less than 25,000 lbs.
This will fit in a 20'ft closed top container.
LIC Cincinnati Ohio $19,000

Inquire: steve_mrgrungy@msn.com