12.5M Swing 10M Table Titan SC 125/160 D CNC VTL
TITAN SC 125/160 D CNC
12,500mm Swing
10 Meter Table
5,500mm Under the Rail
Under power for inspection.
$4,000,000.00 USD FCA Russia
Inquire: steve_mrgrungy@msn.com
1650mm (65") Swing CNC Pensotti VTL
Table Dia. 1250mm (49.2126")
Max Turning Dia. with vertical head 1650mm (64.9606")
Max Turning Dia. with side head 1500mm (59.0551")
Max Turning Height with vertical head 1100mm
Max Distance between table/Turret,
Lower Face of side head 720mm (28.3465")
Vertical stroke of vertical ram slide 1000mm (39.3701")
Horizontal stroke of side head slide 650mm (25.5906")
Stepless table rotation speed in 2 ranges RPM 3, 1-315
Vertical/Horizontal feeds of heads
(Decades Setting) MMPR 0,01-9,99
Slow Motion to heads (Selective Setting) MMPR 1-1000
Rapid Traverse to heads MMPR 8000
Max workpiece weight at average high speed Kg 6500
Max Cutting force for each head N 50,000
Max Tool Section mm 40 x 40
Min Turning Dia mm 345
Main DC Motor KW 45
Voltage V 440 / Hz 60
Electrical switchgear for auxiliary controls V 110
This machine was built in 1986, and retrofitted with a new control in 1997.
It has Heidenhien scales, and a NUM 1060 CNC control.
The machine was used mostly for threading and finish work.
It also has a complete enclosure, coolant system for both the ram and the side head,
and a fitted conveyor for discharge at the right rear of the machine.
Please let me know if you need any other information.
Fly into Erie, via Pittsburg/Buffalo/Cleveland
Asking $149,500.00 EXW. Erie, Pennsylvania, USA
48" Swing 42" Table King Vertical Boring Mill
Click here for slideshow: http://s159.photobucket.com/albums/t142/stevehenry/Vertical%20Boring%20Mills/42%20Inch%20King/?action=view¤t=d3c19e86.pbw
(1) One Used KING , BORING MILL VERT
Serial No.: 3025 LOT 401 - Year: 1952
42"KING,48"SW,3 HEADS,4-JAW,200 RPM,TRACER,36"U-RAIL,30 HP.......
____________________________________________________________________________
42" DIAMETER 4-JAW CHUCK WITH TOP JAWS
48" MAX. SWING
36" MAX. UNDER RAIL
16 TABLE SPEEDS RANGING FROM 6.7 TO 200 RPM
16 FEEDS RANGING FROM .003" TO .500
RAPID TRAVERSE TO ALL HEADS
SWIVEL TURRET HEAD ON RAIL
SWIVEL RAM HEAD WITH TRACER ON RAIL
SIDE HEAD WITH 4-WAY TOOL HOLDER, 29" VERTICAL TRAVEL,
22" HORIZONTAL TRAVEL
36" TRAVEL OF TURRET SLIDE
30 DEG. SWIVEL OF TURRET HEAD EACH WAY
60 DEG. SWIVEL OF RAM SLIDE EACH WAY
FLOOR SPACE: 114" X 139",EST.
WEIGHT: 35,000 LBS.
COMPLETE WITH 30 HP 440/3/60 MAIN DRIVE MOTOR, 3 HP 220/440/3/60
RAPID TRAVERSE MOTOR, ELECTRICAL CONTROLS, TOOL HOLDERS, PENDANT
CONTROLS, AUTOMATIC AND ONE SHOT LUBRICATION.
GENERAL CONDITION: INSPECT UNDER POWER IN PLANT
FOB..........................................OHIO LOCATION
_____________________________Price $29,500.00
Inquire: steve_mrgrungy@msn.com
2002 Century-Turn 3200mm 110" CNC Vertical Boring Mill
2002 CENTURY-TURN 110” CNC VERTICAL BORING MILL
CONTROL: FANUC 18I-TA 4-AXIS CONTROL
TABLE DIAMETER 110”(2794mm)
MAXIMUM SWING 126”(3200mm)
TABLE RANGES (2)
TABLE SPEEDS 0 - 65 RPM (MAY BE INCREASED)
MAXIMUM HEIGHT UNDER RAIL 65”(1651mm)
X-AXIS TRAVEL - HEADS 1 & 2 50”(1270mm)
Z-AXIS TRAVEL - HEADS 1 & 2 40”(1016mm)
TABLE SPINDLE MOTOR 60 HP
Z-AXIS RAMS’ CROSS SECTION 7”(178mm)
X & Z AXIS BALL SCREW DIAMETER 63MM
ATC CAPACITY 12 STATION X 2
EQUIPPED WITH:
2 RAMS
COOLANT SYSTEM
RENISHAW PROBING
SANDVIK CAPTO TOOLING FOR BOTH RAMS
ZF 2-SPEED GEARBOX
24 SANDVIK TOOL BLOCKS
15 HP 2-GEAR RANGE LIVE SPINDLE FOR LEFT HAND RAM HEAD
DUAL CHIP CONVEYORS
360,000 POSITION C-AXIS FOR TABLE INDEXING
Under Power
Ready for INspection
$ POR
Inquire: steve_mrgrungy@msn.com
11500mm Swing Niles Vertical Lathe
NILES VTL 11,500 mm Conventional Type
Turning Diameter: 11,500 mm
Table Diameter: 11,200 mm
Height Under the Tool Post: 3,000 mm
Height under cross rail: 4,000 mm
Power: 50 HP
Table load capacity 200 tons
Table RPM operation: NC
Maximum Table RPM: 7
Milling Head
Late 1950's
Machine weight approximately 350 tons
Under power for immediate inspection by appointment.
Location is Asia
Price $549,000.00 USD
Specifications Are Approximate Only, Intended Solely As A Guide, And Not Binding, offers subject to prior sales.
Inquire: steve_mrgrungy@msn.com
62"/65" X 50" UR King VTL/VBM
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Vertical%20Boring%20Mills/62%20King/?action=view¤t=f15211aa.pbw
(1) One Used KING , BORING MILL VERT
Serial No.: - Year: 1952
62"KING,3 HDS,4-JAW CHUCK,50"U-RAIL,60 RPM,40 HP AC..............
____________________________________________________________________________
62" DIAMETER CHUCK
65" MAX. SWING
50" MAX. UNDER RAIL
TWO SWIVEL RAM HEADS
SIDE HEAD
4-JAW CHUCK WITH TOP JAWS
TIMKEN BEARING SPINDLE
48" VERTICAL TRAVEL
2.5 TO 60 RPM, VARIABLE
(24) FEEDS: .0025" TO .500 IPR
+- 30 DEG. SWIVEL OF RAMS
POWER RAPID TRAVERSE
POWER RAIL CLAMP
WEIGHT: 65,000 LBS.
COMPLETE WITH 40 HP 440/3/60 AC VARIABLE SPEED MOTOR (NEW 1995),
5 HP ELEVATING MOTOR, ELECTRICAL CONTROLS, PENDANT CONTROLS,
AND ONE SHOT WAY LUBE.
GENERAL CONDITION: GOOD CONDITION - INSPECT UNDER POWER IN PLANT
.....................................PENNSLYVANIA LOCATION
_____________________________Price $49,500.00 ___________________________________
Inquire: steve_mrgrungy@msn.com
56"~68" X 48" UR Bullard Dynatrol
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Vertical%20Boring%20Mills/56-68%20X%2048%20Bullard%20Dynatrol/?action=view¤t=ddd32965.pbw
56" BULLARD DYNATROL VERTICAL TURRET LATHE
WITH 4 POSITION POWER INDEX SWIVELLING TURRET HEAD & SIDE HEAD
S/N 32346 NEW 1968
DIAMETER OF 3 JAW CHUCK TABLE ------------- 56"
MAX. SWING, SIDE HEAD BELOW TABLE --------- 68"
MAX. SWING, SIDE HEAD IN WORKING POSITION - 62"
APPROX. WORK HEIGHT TO RAIL FROM CHUCK ---- 48"
20 TABLE SPEEDS --------------------------- 8 TO 300 RPM
VARIABLE FEED RANGE ----------------------- .001" TO .250 IPR
POWER FEEDS AND RAPID TRAVERSE TO BOTH
TURRET AND SIDE HEADS
4 POSITION TURRET HEAD SWIVELLING 30 DEG.
IN EITHER DIRECTION AND WITH 30-3/4" TRAVEL
ADJUSTABLE RAIL
SIDE HEAD
MAIN DRIVE MOTOR -------------------------- 75 HP 230/460/3/60
APPROXIMATE MACHINE WEIGHT ---------------- 71,000 LBS
EQUIPPED WITH ---
3 JAW COMBINATION (INDEPENDENT) POWER CHUCK WITH TOP JAWS
4 POSITION POWER INDEXING TURRET HEAD
CHROME WAYS
HARDENED & GROUND CROSS FEED SCREW
COOLANT PUMP & PAN
PENDANT CONTROL
4 WAY TOOL POST ON SIDE HEAD
TEMPORARY SPECIFICATIONS SUBJECT TO CUSTOMER VERIFICATION
PRICE --- F.O.B. WAREHOUSE, DES PLAINES, IL
WITH 30 DAY RETURN PRIVILEGE
PAYMENT PRIOR TO REMOVAL ------------ $Please call for pricing/loading/delivery.
Inquire: steve_mrgrungy@msn.com
Sellers 20'/42'/54' Vertical Boring 16' Under Rail
Complete Specs available only upon request. Price is FOB West Coast USA
Basic Specs:
200 Ton Capacity
Main Drive Motor:
100 HP/550 Volts/3 Phase/60Hz/1600 RPM
Table Size 20'(6096mm)
Swing 42' (12801.6mm)
Swing with Columns removed, would be 54'(16200mm), with part mounted to floor plates.
At which point the Column is mounted to the table.
Max Under Rail: With 4 Blocks,16' (4876.80mm) OR, with 3 Blocks 110" (2794mm)
Special Note:Rail is Peg Block rail machine and it shows 3 blocks, but there are 4 blocks.
This machine is set up as a "Tinker Toy" with many applications.
$1,200,000.00 USD FOB West Coast USA
Inquire: steve_mrgrungy@msn.com
Please Scroll Down 2008 Reb. Giddings & Lewis 48"VTL
This G&L was retrofitted late last year and the owner wants to sell it because he needs a larger machine.
This can be inspected in plant under power. It has been used about 200 hours since the retrofit.
It is in like new condition and ready for production.
Fagor 8055/CRT
Capacity:
Table Diameter ............................................................................. 48 ."Maximum Swing ..................................................................... .6..0.. .".
Maximum Height Under Rail .................................................. .6..0.. ."
Spindle:
Spindle Speed: Minimum ........................................................ .0.. .r..pmMaximum .......................................................... .3..2..0. rpm
Motor ....................................................................................... .5..0.. .hp
Head(s):
Number of Heads ..................................................................... .1.. ...Turret Head .............................................................................. .1.. ...
Equipped With:
Fagor 8055/CRT CNC ControlConversational Programming
Graphics
RS-232 Interface
New Yaskawa Motors and Drives (All AC)
50 HP DC Main Motor With Digital Drive
Heidenhain Digital Scales On X, Z & W (Rail) Axis
5 Position Turret With Heidenhain Rotary Encoder For Positioning
Rotary Encoder for Threading on Table
All Ballscrews Reconditioned
Ways are Hardened and Reground and Fitted
Reconditioned Gear-Box
All New Wipers
All Available Toolholders For Turret
Manuals & Schematics
Flood Coolant System
Splash Guards
Cross-Rail (W-Axis) Travel CNC Control
Spindle Speeds Controlled through CNC Control
48" 4-Jaw Universal Chuck
36" Vertical Ram Stroke (Z-Axis)
$289,900.00 USD FOB
Inquire: steve_mrgrungy@msn.com
96"/102.5"/78"Under Rail King VTL
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Vertical%20Boring%20Mills/96%20Inch%20King%20ReBuilt/?action=view¤t=f2a8bc14.pbw
The specification for VTL (King make) - TOTALLY REBUILT
Serial # : 2021
Lot # 269
Underpower
Maximum work load
low speed : 17 tons
Half speed: 14 tons
High speed: 10 tons
Diameter of table : 96”
Maximum diameter of work: 102.5”
Maximum height under tool holder : 78.0”
Min distance between R & L heads : 20.62”
Max travel of side head vertical : 64”
Max travel of side head horizontal : 36”
Max travel of R & L heads , vertical : 72”
Motor HP : 40 DC
Including auxiliary tooling and all Jaws
***REBUILD*** (2002)
New bearings in table
Installed variable speed drive on table for both low and high ranges
Rebuilt, machined and scraped both heads
Rebuilt, machined and scraped side head
Rebuild work was performed by: PRO SPINDLE INC. CANADA
$195,500 USD FOB Canada
Inquire: steve_mrgrungy@msn.com
300"/354" Niles 4 Axis CNC VBM
Click here for slide show: http://s159.photobucket.com/albums/t142/stevehenry/Vertical%20Boring%20Mills/300-354%20Niles%20CNC/?action=view¤t=8283ac8a.pbw
300"/354" NILES 4-Axis CNC Vertical Boring Mill
Model: Double Housing
New 1955 CNC Retrofit in 2008
(2) Swivelling Vertical Rams
Table Diameter ........................ 300"
Maximum Swing ......................... 354"
Maximum Height of Workpiece ........... 192"
Ram Stroke, Vertical .................. 120"
Ram Cross Section, Octagonal .......... 13.75"
Table Speeds .......................... to 20 RPM
Rapid Traverse ........................ 157.48 IPM
Table Weight Capacity ................. 200 Tons
Floor Space ........................... 708" x 433"
Height ................................ 630"
EQUIPPED WITH:
FANUC 0i-TC CNC Control
2-Vertical Rams - 4-Axis CNC
300" Diameter T-Slotted Table
Operator's Platforms on Each Ram
Hydrostatic Table Bearing
Ball Screws
(4) Face Plate Type Jaws
ZF Gear Box
Fanuc 9 KW Servo Motors
(2) 100 KW Fanuc Main Drive Motors
Inspect Under Power
Price: $4,400,000.00 USD EXW
Inquire: steve_mrgrungy@msn.com
Schiess Double Coumn Vertical Boring Machine
SCHIESS Double Column Vertical Boring Machine
Model: 5K600
Year: 1968
(With 3-Heads) Max swing: 6250mm (246"),
Max vertical height under the rail: 3650mm (144"). Table dia: 6035 mm (237.6")
Max swing with side head: 6035 mm (237.6")
Max swing without side head: 3800 mm (149.6")
Max turning height: 3658 mm (144")
Travel of boring rams: 2134 mm (84")
Table speeds: 0.3 to 23 RPM
Table loading: 50 Ton
Main drive motor: 75kw
Electric supply: 380/3/50hz
Machine weight: 200 Ton Condition: First class machine
Inspection: Machine is fully assembled
Demonstration: Under power
Inquire: steve_mrgrungy@msn.com
6.1M / 7.5M Swing Armstrong VTL
W.G.Armstrong and Company (England) VTL conventional type
Table/Faceplate diameter: 6,100 mm (7,400mm with extensions)
Table max RPM 60
Maximum swing: 7,5000 mm
Maximum height under rail: 3.200 mm
Accessories
2 off cross slides mounted on the bridge descriptions as follows:
L/H vertical slide has milling head travel X/Y - 650 x 800 mm / 7.5 HP motor
R/H vertical slide has clapper box X/Y - 650 x 800 mm
See photos for a clear understanding
Table extensions are included (8 off 650 mm long)
4 off table/chuck jaws
Comments
Machine is being assembled at present, the rail elevating screws have been extended and nuts have been renewed,
main drive gearbox has been overhauled along with other mechanical and electrical works,
all machine parts and slides are excellent.
This machine has been used for the machining of big diameter bearing and gear rings,
and could be used for facing off big tank vessel flange faces and weld preps.
Electrics
380V / 3 Phase
Main motor in the photo is not the original one, it is used for test running only, main motor is aprox 70 HP
Asking Price US$ 495,000 FOB
Specifications Are Approximate Only, Intended Solely As A Guide, And Not Binding, offers subject to prior sales.
Inquire: steve_mrgrungy@msn.com