The dash right after I took off the bezel to work on it. And the Plexiglas before I put the 6" Neon Inside
	Being a Noob at this, I taped the surrounding on the Monitor, not knowing I wanted it covered with Bondo to give it a flush look, so that only the screen of the monitor would be displayed.
	I removed some Bondo white it was still hot with a blade, since it was like rubber at that time and sanded a little. Also, glued the DVD Drive bracket with Epoxy to start getting an idea. As you can see on the on the right of the Rear View picture, I removed the bottoms to relocate them later on if I wanted to.
	I made a Bracket for the Motherboard and one Bracket for the Hard Drive. Picture 4 Indicates how it would look once it's mounted and finished.
	That's where the Motherboard and Hard drive are going to go. Mounted on that Piece of Metal that goes accross.
More Pics Coming tomorrow.