This is my 2002 Nissan Altima 3.5L V6 5Spd
	The 8" Touch Screen Monitor After taking it Apart, with the Remote Control & Software
	VIA EPIA 800 Mini-ITX Motherboard Specification Processor VIA C3/EDEN EBGA 800MHz Processor with Fan Chipset VIA PLE133 North Bridge VIA VT8231 South Bridge System Memory 2 PC133 DIMM sock Up to 1 GB memory size VGA Integrated AGP 4X Graphics Expansion Slots 1 PCI Onboard IDE 2 X UltraDMA 133/100/66 Connector Onboard LAN VIA VT6103 PHY 10/100 Ethernet Onboard Audio VIA VT1612A 2 channel AC'97 Codec Onboard TV Out VIA VT1621 TV out Back Panel I/O 1 PS2 mouse port 1 PS2 keyboard port 1 VGA Port 1 Parallel 1 RJ-45 LAN port 1 RCA port (SPDIF or TV out) 1 S-Video port 2 USB 1.1 ports 1 Serial port 3 Audio jacks: line-out, line-in and mic-in Onboard I/O Connectors 1 USB connector for 2 USB 1.1 ports 1 CD Audio-in connector 1 FIR connector 1 CIR connector 1 PS2 connector 1 CPU/Sys FAN 1 Buzzer ATX Power Connector BIOS Award BIOS 2Mbit flash memory System Monitoring & Management CPU voltage monitoring Wake-on-LAN, Keyboard-Power-on, Timer-Power-on System power management AC power failure recovery Operating Temperature 0~50°C Operating Humidity 0% ~ 93% (relative humidity; non-condensing) Form Factor Mini-ITX (4 layer) 17 cm x 17 cm
	I gutted the inside of the glove box compartment in the dash to fit the motherboard/Hard Drive/ and Power Supply I also put a 6" Neon Tube to give it some light.
	I located the 6" Neon light switch right next to the dash Lights Dimmer.
	SD-C2402 DVD-Rom Drive Sony Vaio PCG-FXA32 Laptop
	Peripheral Super VEN 4 OEM Interface Adapter 4-RCA Inputs to Speaker Level Outputs to send sound to my Bose System
	Slim Type CDROM/DVDROM/CDRW Adapter Converts your slimline notebook drive to a standard IDE connection.
	Notebook HD to IDE Converter 2.5" to 3.5"
	Snap-On Miniature 12v DC Power Supply - 200w

FABRICATION