Johns Steam Page

Wilhelm Krauss Workmen

These three are  manufactured by Krauss in the early to mid 1930s

.



A Group Photo of the Krauss Workmen

Fleischmann 232 Blacksmith with Anvil
This is an operable Fleischmann Blacksmith Figure accessory, as the pulley is cranked the Blacksmith strikes the anvil with his hammer



Fleischmann 235 Grindstone Figure
This is an operable Fleischmann Grindstone figure accessory, the grindstone turns and the little mans arms operate the crank as it spins.

Fleischmann 236 SausageMaker
As the pulley is cranked the Sausages come out of the grinder and into the pail
Currently this one is missing the sausages but I plan on taking care of that situation soon.

My three Fleischmann Workmen
A group photo

Marx Grinding Stone Figure J-9058

Some Of My Workmen
A group photo of some of my Workmen

Jensen 100 Workshop

From 1948 to 1985 Jensen made a workshop accessory that cold be operated with their Steam Engines, the workshop is a Model 100
This one dates from somewhere between 1951 to 1985, it consists of 5 working tools and a lineshaft.
A better photo will be made later, till then this is my Jensen Model 100

Wilesco M56 Model Plate - Workshop
The M56 Consists of drilling machine M 51, two-wheel grinder M52, circular saw M53 and a countershaft mounted on a base plate.

Wilesco M-61 Drop Forge Hammers

Wilesco M66/2 Dynamo with Streetlight

Wilesco M160 Hack Saw





Wilesco M62 Drop Hammer


Mamod Workshop Tools




Mamod OW1 Open Wagon

I also have a wagon that is manufactured by Mamod that is made to be pulled behind the SR1 Roller.


Sutcliff Oil Can

I believe this to be a replica


Doll Bagger