Update - unlocked phones appear to remain unlocked and work properly after the update, according to scattered reports.
Requirements:
1)A USB Cable for iPod/iPhone
2)1.1.2 JailBroken iPod/iPhone
3)An open Wi-Fi Connection
MAC VERSION - Download the 1.1.3 package maker and open it, then run Run_This. Read carefully, press Enter when necessary, and the image will be uploaded to your phone. Then skip to the Installer part below.
Here's how you do it:
- Start with a 1.1.1 or 1.1.2 jailbroken ipod-iphone with Installer.app installed AND AT LEAST 300mb OF FREE SPACE.
- Plug in your phone via USB to your computer.
- Download, extract, and run iBrickr Special 1.1.3 jailbreak edition (ibrickr.exe in the archive).
- iBrickr will determine what firmware you are running on your phone and make sure you can run the update.
- iBrickr will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).
- iBrickr will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.
- When iBrickr finishes (should take about 10 minutes), it will tell you to go to Installer and install the "1.1.3 soft upgrade" package. Do that.
- The upgrade will stall at about halfway. THIS IS
- When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh (activated) 1.1.3 firmware.
---------------------------------------------------------------------------------------------------------------------
Use Installer.app to JailBreak your 1.1.3 iPhone/iPod Touch (No PC!!!!)
MMi Installer Repo "modmyifone.com/installer.xml"
Hey! So we've made it even easier to Jailbreak 1.1.3 using the Dev Teams jailbreak method. You will now find 1.1.3 Dev Team Jailbreak in installer, provided to you by the ModMyiFone repository.
Poetic_Folly and I have written up a package and tested it thoroughly and it appears that there are no issues running this Jailbreak from Installer.
Requirements
All you need to do is find the 1.1.3 Dev Team Jailbreak package in Installer and run it. The rest will be done for you. Once done (about 20 mins - some reports have been as long as 50 minutes) your phone will restart and you will be updated and jailbroken to 1.1.3!