Floating Objects:
1)select an object
2)place object and lower it 1x
3)cut object
4)lower object all the way down and then place it
5)cut object again
6)lower object all the way down again and place it
7)after placing it lower it 2 more times
8)switch CAP theme or click test play and when u go back to the editor your object shud be floating
How to lower floating objects
1) Raise The Ground BESIDE The Object
2) Get An Object That Can Be On The Raised Ground And The Floating Object
3) Have The Object Ontop Of Ledge And Ground
4) Lower The Ground
Sunken objects:
1)select an object and lower it 1x
2)place and cut object
3)lower object agn 1x and place it
ur object in now half way into the ground
Under Ground Objects:
1)get a ground peice ex.Grass square
2)lower it 1x then place it
3)cut the grass peice
4)lower the cut grass peice 2x now and place it
5)cut it again
6)continue these steps till u get how low u want ur peice
7)
to get ug just raise the ground 2x and put a rail from the corner to almost the middle then grab on the rail and go sideways into the ground then drop down onto the grass peice
Ground Merging:
1)select an object ex. a 2x2 tree
2)lower the 2x2 tree all the way down
3)place the tree in the hole and raise it 1x
4)lower a 2x1 peice of ground beside the tree all the way down
5)cut the entire hole
6)place ur cut object and it should be merged with the ground
Floating rails
1)select a tunnel and place it
2)place a rail inside the tunnel
3)save CAP
4)load CAP
5)delete tunnel with a 1x1 small object in the corner of the tunnel
6) your rails should be floating
Frz GAPS: (for this u HAVE TO HAVE infinate text)(to get infinate text u will need a gameshark or a code breaker)
1) make a gap
2) goto name
3) put 30 spaces then a 5 letter word ex. OWNED
4) make sure you dont run into it lol 
Frz Flags:
For this all u need to do is put 2 or more flags right beside eachother and get someone to run into them ( its fun to make like a really long coaster and get them to ride it and then at the end they fly into flags lol
)
Rail Sheet
1. Make a long CAP.
2. Place a rail
3.Drag it to the other end of CAP.
4.Zoom in when stem breaks off rail
5.place end of rail all the way in air.
6.move slowly SLOWLY back to the rail
7. when u see a big red sheet press UP on the D-PAD
Placeing Smaller Rails:
This glitch is to make really tiny rails.
1. Make a single rail with the rail tool.
2. Grab on end and bring it so close to the other end so that you cant place it.
3. Hit left then right.
4. The rail stayed.
Super High Objects/Rails:
This glitch is to place rails higher then normal.
1. Float an object and place rails on top of it.
2. Now raise the floating object all the way.
3. Now using the area select tool hit X on one space under the raise floating object.
4. Now drag it off the object and lower it to ground level.
5. Notice the land is lowering but the floating object isnt.
6. Keep doinf this about 3 times.
7. Now with the rail tool hit square under the floating object.
8. You should see the rails on top of the object and the object really high.
9. Now drag a rail off and see that they stay up there.
10. You can make them go even high if you repeat steps 2-4.
Stacking Flags:
This glitch is to have the team flags on top of one another.
1. Make a small park but dont place any objects.
2. Save it and go online to host it.
3. Turn on the team flags to see thier default spots.
4. Now go edit the park in park editor.
5. Place the green flag on of the red flags normal position.
6. Place the yellow flag on the blue flags normal position.
7. But dont place the red/blue flag!
8. Now go online and host it.
9. Turn team flags on and see they are on top of each other!
10. Dont touch them, they will make your game freeze if you touch two flags at once.
Land Raised/Lowered Outside Of Park
This glitch is to have one space of land lowered of raised out past the park bounds.
1. Resize park downward all the way.
2. Resize park in the Right direction all the way
3. Now put the SEL tool or P1 tool put it in that far corner (bottom right corner) but dont click X.
4. Now when its in the corner, move it 3 times to the left
5. Now on that spot u can either raise or lower the ground (best to start off with raising that ground all the way up)
6. Ok now once you have raised the ground in that spot goto resize park and resize the RIGHT side over to the LEFT 1 time.
7. Now go back to the editor and look in that spot...the raised ground is gone....or is it.
8. Go into the very corner (bottom right corner) and lower it 1 time...TADA your raised ground is now out of the cap fence
