A veneer is basically a shell which sits over the front of your real teeth. It is about 2mm thick and covers approx. 8 - 10 teeth.
The veneer doesn't need anything to attach it to your real teeth. It is made of a rigid material and will snap into the grooves between your real teeth.
Due to the nature of mail order, we send some additional material with the fangs to fill in any loose areas but generally it won't be needed.
Anything that goes inside your teeth will definately affect your speech so we make our teeth to fit on the outside. You may still have some speech issues until you've practised a bit as you will not be used to having fangs etc in your mouth.
Fangs, for instance, cause issues with F's... go figure!
To maintain realism, the actual fangs and teeth may sit slightly forward of your real teeth.
To make the veneer teeth fit perfectly over your own, we would have to increase the size of the individual teeth and this would make your teeth look....goofy? strange.
Yes, we do.
We have an easy DIY kit that will be sent out when we receive your order.
You'll need half an hour, a mirror and a mug of hot water !
(The kit is INCLUDED in the cost of the fangs)
A dental cast actually doesn't help with my process but, if its a recent cast (6-12 months) then it will save time sending you a DIY kit.
Especially for an international customer as shipping times can vary.
The DIY kit is included for convenience and i do not discount if you have your own dental cast.
My process requires that i use a kit to copy your cast!
A little. We try to keep the veneer as thin as possible to minimise this.
Something to consider... watch ANY vampire film etc, 99% of the time you can tell there is something foreign in the actors mouth (even the hollywood ones).
Also, you will notice it more than other people will. You're wearing fangs; thats what others will see!
Yes we can. Please use the Contact Us page and we will get back to you ASAP.
Custom Made veneers are subject to quotation but usually start at £75 (plus P&P).
Please include as much information as possible, especially if these are for a particular event.
Recent commissions include Gold Plated Pirate Teeth, a full Werewolf set, several Klingons and Austin Powers style teeth.
Double sets (top AND bottom teeth) normally get a little discount for the 2nd set.
lower sets generally do not fit quite as well as the top sets.
The lower jaw motion is complicated and the fangs will clash when you move the lower jaw sideways, these are great for costumes but not so good for long term wear.
YES! Many of our customers are outside the UK. There are higher shipping charges for international customers; the finished items are sent via a tracked method as we have had problems with the postal services in other countries.
www.ft.com is a good place to check the current exchange rates
With the veneers, we have found this is generally unnecessary. The dental acrylic we use is the standard colour used in most dentures and suits 99% of people.
Colour differences between the top veneer and real bottom teeth will not be noticable unless your bottom set is very discoloured, we can accomodate this if needed but it really is our intention to improve you smile!
Should a custom set need colouring for effect, we can do this.
At this time, NO. There are companies out there that can do a better job than me and some of these can be found in the links section.
This site offers something that is generally cheaper than caps, with more scope for realism.
Depending on the orders we have (and fitting this in with 'real' work) it can take between 3 and 6 weeks for you to receive the teeth after we have got you completed casts back here.
For orders which are required urgently, a small premium may be charged.
Our process ensures we keep a copy of your teeth for repairs and repeat orders so if you do sit on them, we can repair them.
We offer this as a free service but require you to cover the shipping costs.
Your tooth casts remain on file for at least a year. After this time, a new cast may be required to account for changes in your teeth but we will advise if this is necessary.
Because we're nice, for Students we can offer a 25% discount on the Teeth.
You will need to send us 2 forms of checkable ID, i.e. a photo of your student card etc.
This is ONLY used for verification* purposes and is deleted / destroyed ASAP.
We will then issue an invoice for the correct amount. Contact us for more details.
*we NEVER share your data with ANYONE....EVER!
We want you to be happy with your teeth and if you have any problems, please contact us.
Due to the 'custom' nature of this product and the work involved in producing the teeth, full refunds are not possible once the fangs have been produced, however we will try to rectify the problem, even producing replacement sets.
We can... Claws haven't been a particularly popular item.
They can be expensive and difficult to wear but if you do want some, please contact us and we would be happy to discuss your requirements.
We are currently working on some prototype generic fit designs and pictures will be added to the product gallery as soon as they are available.
Foam Latex Prosthetic Masks etc are easy to apply and remove given time and practise. Two adhesives are listed below and it is recommended a proper remover is also used. In practise, it will take a minimum of an hour to apply even a simple piece and apply the correct makeup to blend it seamlessly with the skin.
A good tip is to apply Red as the first layer as this will give the impression of blood under the skin. If this is not done, the piece will look very flat when captured on film and stands out.
Spirit Gum is the preferred glue if the piece is only to be worn for a few hours.
Prosaide is the film industry standard if a piece is going to be worn for an extended period.
Removers for the above are highly recommended. Removal is not a quick process either, time and care must be taken not to hurt yourself or your actor etc.
A cotton bud, soaked in remover and slowly worked under the piece will give good results.