Creative Airsoft

INTRO: I call this one the Angry Octopus, It can remotely fire 4 ASC7's simultaneously at a distance of about 40feet. The wires shown are only about a foot long but they can really extend to about 30feet. This is not only cool but it will make the enemy think a little before rushing your headquarters.
SPECS: It is about 4 inches wide and about 3 inches tall, it weighs 1 1/2 pounds. it takes 1 nine volt battery and the remote runs on a flat 3 volt watch battery.

For Plans Email Gino At...  dartairsoftteam@hotmail.com

INTRO:This second one is a IR-Detonator (Infrared Detonator) that attaches to your ASC7 Anti-Personnel mine. The wire to the left of the picture is the RCA connector that plugs in to your ASC7, the wire to the right of the picture is the plug where your connect a charger to charge the 7 volt battery attached to the bottom of the unit. To make a long story short... If the unit detects movement in front of it, it will detonate the mine.
SPECS: It see's for about 10feet in front and at about 45 degrees to the side at the same distance. It is very light, rechargeable, and durable. It is also about 3inches tall and can fit in almost any tactical vest . The spring allows the unit to shrink in size very quickly.

For Plans Contact Gino At... dartairsoftteam@hotmail.com

  This one is called The T.A.P 3 it stands for tactical Assault Pistol Version 3(You don't want to know about the first two). The T.A.P 3 Is the Airsoft community's first wholemade Airsoft gun! It shoots about 300fps and has a 8 inch long barrel, NOW INCLUDING HOP-UP!!!. (It is a muzzel loader) It has a foregrip and the charging handle is located in the back of the pistol. It has a laser mounted under the barrel, and a High powered Blue LED Light on the top. Here is a list of what it is made out of...

Various Airsoft Tommy Gun Internals
4 Lead Weights
A Deck of cards
A recoil spring
Cardboard
A Long Neck Lighter
Toliet Paper Roll
Stuffing From A Teddy Bear (Not mine! My Sisters!)
A Blue High Power LED Light
A Class IIIa High Power Rifle Laser
---------------------------------------------------
Here is a list of tools I used...

Hot glue and (or)Solder
Phillips Screw driver
Flat Head Screwdriver
Dremel
Hack Saw
Gorrila Glue
AND THE TOOL EVERY PROJECT CANNOT DO WITHOUT.....DUCT TAPE!!!!!

It took about 2 days to make, and everything used is easy to find!

Happy Airsofting,

Gino M.

INTRODUCING THE TAP 3....






This is the blue LED light shining on the wall..it is quite brightr.. it can light up a whole room.

The laser..on the wall.

For Plans... Contact Gino M.

Ok everyone I assume you all have seen the third version of the T.A.P (Tactical Assault Pistol) if you didn't heres a link http://www.freewebs.com/creativeairsoft/caprojects.htm . Well it has returned and as I stated in my last thread I will take all your constructive criticism and used it to build my new version. Well I have and here are some of your ideas... Less duct tape, use wood, less Airsoft gun parts, use bondo, give it a stock, and make it black. Well I did all that, and then some. It is now called the T.A.R 4 (Tactical Assault Rifle Version Four) it has a Fiberforce lightweight stock and the lower assembly is made from wood, plastic and bondo. The top still has some duct tape on it but I made sure it was black duct tape. I also made the gun a little more silent as it was way to loud. It still is very loud but has some what decreased in sound. Its grip under the stock attachment was hand carved by me out of heavy-duty balsa wood. I got rid of the laser light because I thought it was un-necessary and ugly, it still has its bright blue LED light on top and its ugly cheek rest/cocking lever. Attached to the stock is a Velcro holder for the ramrod to load the gun. The only drawback that makes it un-skirmish-able is that it can only be muzzle loaded. Anyway, WITHOUT FUTHER ADO I GIVE YOU THE T.A.R 4...

[glow=red,2,300][u][b]Videos:[/b][/u][/glow]
[URL=http://s76.photobucket.com/albums/j30/Gino700/?action=view&current=PICTURE9-12-06102.flv][IMG]http://i76.photobucket.com/albums/j30/Gino700/th_PICTURE9-12-06102.jpg[/img][/URL]
BEFORE PAINTING

[URL=http://s76.photobucket.com/albums/j30/Gino700/?action=view&current=PICTURE9-12-06.flv][IMG]http://i76.photobucket.com/albums/j30/Gino700/th_PICTURE9-12-06.jpg[/img][/URL]
AFTER PAINTING (Includes Shooting of The Rifle)

[URL=http://s76.photobucket.com/albums/j30/Gino700/?action=view&current=PICTURE9-12-06114.flv][IMG]http://i76.photobucket.com/albums/j30/Gino700/th_PICTURE9-12-06114.jpg[/img][/URL]
A QUICK OVERVIEW OF THE TAR (Me Explaining All the Changes That Took Place.)

[URL=http://s76.photobucket.com/albums/j30/Gino700/?action=view&current=PICTURE9-12-06116.flv][IMG]http://i76.photobucket.com/albums/j30/Gino700/th_PICTURE9-12-06116.jpg[/img][/URL]
UPDATED VERSION WITH OUTER BARREL!

[URL=http://s76.photobucket.com/albums/j30/Gino700/?action=view&current=PICTURE9-12-06079.flv][IMG]http://i76.photobucket.com/albums/j30/Gino700/th_PICTURE9-12-06079.jpg[/img][/URL]
JUST FOR THE HELL OF IT, I RAN AROUND MY HOUSE LIKE A IDOIT WITH THE TAR SHOOTING INVISABLE "TANGOS". AT THE START OF THE MOVIE MY MOM COMES RUNNING OUT SAYING "WHAT THE HELL WAS THAT?" THEN AT THE END I SHOOT MY DAD..NEEDLESS TO SAY I ENJOYED IT. (NOTE: PARENTS WERE NOT HURT IN THE MAKING OF THIS FILM!)

[glow=red,2,300][u][b]Pictures:[/b][/u][/glow] (NOTE: All Pictures Were Taken Before I Painted The Rifle)

[IMG]http://i76.photobucket.com/albums/j30/Gino700/PICTURE9-12-06097.jpg[/img]
UP-CLOSE BODY SHOT (NOTICE THE CREATIVE AIRSOFT LOGO I PUT ON IT)

[IMG]http://i76.photobucket.com/albums/j30/Gino700/PICTURE9-12-06098.jpg[/img]
CLOSE-UP ON THE SOMEWHAT SILENT BARREL

[IMG]http://i76.photobucket.com/albums/j30/Gino700/PICTURE9-12-06122.jpg[/img]
NEW OUTER BARREL YOU ALL WANTED

[IMG]http://i76.photobucket.com/albums/j30/Gino700/PICTURE9-12-06100.jpg[/img]
CLOSE UP ON THE STOCK WITH THE VELCRO HOLDER FOR THE RAM-ROD

[glow=red,2,300][u][b]Things To Look Forward To On The Next Versions:[/b][/u][/glow]
Magazine Fed (Hopefully)
All Metal Exterior
Better Cocking System
Less Ugly-Ness
Semi-Auto
Better Accuracy
More Power (And Consistent Velocities)
Not As Loud

[u][b]UPGRADES MADE TODAY![/b][/u]
Flat Black Outer Barrel Assembly
Sling
Custom Barrel Spacers (Dremeled Out By Me)
Enamel Paint Job Over The Wooden Grip
Much More...