The Beam Machine

The Beam Machine is a simple chainsaw
attachment that converts any size chainsaw into a Portable Sawmill! Mill your logs "on site" and produce "Cheap Lumber" for just pennies in gasoline!!!

 IMPORTANT NOTE: No need to drill your chainsaw bar as with other units!!!

Here's How It works!

To use it, just set your chainsaw bar in its special clamp and tighten two sets of screws, then nail a 2 x 4 on a log. Position the saw and mill on the 2 x 4, and cut away. The BEAM MACHINE slides along the 2x4 guide making a straight first cut. Roll the log 90 degrees before making the next cut. After the fourth cut you have a beam.

 Saws Boards Too!

Any size board can be cut with the BEAM MACHINE. Just move the 2 x 4 over the desired amount and saw off a board. Full instructions are included with each unit.

 A Sturdy Tool

Quickly attaches to any chain saw bar. "Safety Bite" clamp holds the unit securely onto the chainsaw bar. An ordinary 2" x 4" is then nailed to the log which provides the path for the guide. The unique "dog teeth" work with a rolling action to walk the chain saw easily down the log. Repeat the process on four sides & you have a square beam. Other cuts are just as easy. Eliminates "chainsaw fatigue" The Beam Machine's exclusive dog-tooth pivoting action takes most of the strain out of sawing because it supports the weight of the saw and provides a smooth, leveraged swing motion. You can square one side of a 12-foot beam in about 5 minutes. 

   Pays for Itself

This tool can pay for itself in only a few minutes. The BEAM MACHINE and a well sharpened chainsaw can saw a 12 ft. 6 x 8 fir beam in less than a half an hour. Price that out at your local lumberyard. The biggest savings are in larger dimensional lumber. Cutting rough-cut 2 x 6 you can definitely save money. You could even sell lumber for extra income! 

A Good Deal

The BEAM MACHINE is not only simple to use - it's also affordable. We are a reliable company and have been manufacturing the BEAM MACHINE for over fifteen years.

 Lifetime Guarantee

If you break or wear out your Beam Machine,
mail it back and we will send you a new one free.

 Building a Log Cabin? 

This mill let's you square two sides of a log fast, making a tight fit easy to achieve. It is also used extensively in Log Home Building to cut out windows, doors and trimming roof edges. It is also used to edge-trim and rip larger boards/slabs from salvage or other larger mills. The BEAM MACHINE was developed by an imaginative inventor who found himself in the bush with a chainsaw and in need of a board.

Actual Savings When Using

Friends Lets Get to The Real Benefits

of Owning One of These "Amazing Little Tools".

Benefit #1 Milling your own lumber "on-site" means never having to transport your logs to the local lumber mill ever again thereby saving you money not only on the transportation costs but also on the wear/tear & maintenance costs on your bike/skidoo.

Benefit #2: Giving your recreational vehicles a "beating" every time you transport logs to the mill will definitely have an affect on the life span of your equipment that was originally purchased for entertainment.

Benefit #3: Converting  your gas/electric chainsaw (or even a rental saw) into a Portable Sawmill will save you "big bucks" even on those little projects such as a dog house or garbage box that you always intend on building.

Benefit #4: If you are anything like I am you love the idea of purchasing a product knowing fully that you will be able to "re-coop" the purchase price within a reasonable period of time. There is no better feeling than getting something for Free my friends so I am here to inform you that the best benefit of  owning The Beam Machine is that you will be milling lumber for only the price of gasoline within one hour of operating your unit!