The Worlds Most Portable, Affordable, Powerfull and Versatile Mig Welder!

Introduction:

       The Ready Welder II is a Completely Portable Mig welding system with 30 to 250 amp capacity at 12 to 48 volts. With capabilities to weld steel and stainless steel up to 3/4" thick and aluminum up to 3/4" thick. The Ready Welder II will provide you with the power, performance and portability like no other portable MIG welding system.

      For myself the Readywelder provides base or mobile quality welding capabilities when ever I need them. This means no worrying about being stranded out in the middle of know where because of breakage. The Ready Welder II wont just provide you with a temporary trail fix but in some cases the Ready Welder II has been known to provide a permanent Trail fix because of its quality welding. The Ready Welder II can also be used at home for custom fabrication such as custom roll cage building. This welder shouldn't be mistaken for just a Mobile welding system but a home unit as well. The quality of the welds provided by the Ready Welder are as perfect as those you would obtain from using a traditional home unit. The Ready Welder II has an optional gasless welding, or gas welding option as well. For more information about the portable C02 tanks go to www.Premierpowerwelder.com 

Included in Standard ReadyWelder pak #10500:

Powered By:

      The Ready Welder II system can be powered in several different ways. One way is to use 1, 2, 3, or 4 12 volt deep cycle batteries depending on the material being welded. For example one 12 volt battery works great when sheet metal welding is needed. For thicker steel such as 1/4" angle iron, The Ready Welder II recommends two 12 volt deep cycle battery's. The Ready Welder II can also be used with most traditional welders (40 VD.C. or less). For my application I chose to run two 12 volt batteries joined together equaling 24 volts output which allows the Ready Welder to weld up 1/2" steel with a 200 amp draw. If I were to ad an additional battery for a total of three 12 volt batteries combined voltage equaling 36 volts would allow me to weld up to 3/4" steel or aluminum at 270 amps drawn. For those of you who already have an Under hood welding unit such as the Premier Power Welder, you too can use the Ready Welder II in sequence with your Power Welder. The Ready Welder II can be combined with your already existing Premier Power Welder for the ultimate in current control welding. Combining the Power welder and Ready Welder II allows you to weld either MIG, TIG, or ARC style welding of your choice. With these types of capabilities you complete all you welding needs....ever!

Diagram 1.1

Battery hook up:
(Diagram 1.2) In order to obtain 24 volts from two standard sized 12 volt battery you must perform the following instructions. First thing is first, Be extremely careful when working with batteries, they can easily cause major injury. Ok, with two battery's sitting next to each other connect Battery-1's Positive(+) to Battery-2's Negative(-) using 4awg. wire. Be careful not to let the connections spark or arc when connecting. Now that you have that connected you simple use the available Positive(+) connection and the other battery's Negative(-) connection to hook up to anything requiring 24 volts. See Diagram 1.2 for details.

IMPORTANT NOTICE:

If your vehicle is equipped with the premier power welder and you plan on buying a readywelder to use in conjunction with your power welder note that you cannot weld on your own vehicle. When using the Readywelder attached to your power welder its ok if you weld on other vehicles besides your own or parts off the vehicle. This has to do with a polarity issue. When the two units are connected together they create a straight polarity current.

FINAL RESULTS:

EXAMPLE 1: (Rocker Panels)

I was very impressed with the overall performance of the Ready Welder. It was just like welding with a home unit. I welded several different types of steel to test the welder in conjunction to the usual materials I work with and would use the welder for. After running a couple nice beads I felt really comfortable with the Ready welder and infact it might replace a lot of the use my Lincoln Home Mig welder would perform.

For my first test we welded some custom built rocker panels on my friends Rock Crawler XJ (Cherokee). The construction of the Rocker panels is a combination of 1/8" and 1/4" Steel. Below are some pictures of some fresh welds performed with the Ready welder II. These are the 1/8" steel rocker panels. Notice the clean smooth welds.

EXAMPLE 2: (Motor Mounts)

For the next test we gained some real confidence in the Ready Welder II. For the next custom built project we made some Chevy S-10 4.3L motor mounts with polyurethane bushings. The Materials used for this project was 1/4" steel, combination strap and round stock. As im sure you understand this is a real test, We were a bit hesitant about using the Ready Welder but after testing the Rocker panels on the Cherokee we knew what the Ready welder was capable of. Keep in mind this isn't your average 4.3L V-6. This 4.3's been modified and is currently peaking 260hp. So you can imagine the strength needed to hold this motor in place.
Notice in the pictures how clean and smooth the welds came out. We performed this on both motor mounts. The mounts have been holding up for about 3 weeks and show no sign of stress.

EXAMPLE 3: (Upper A-Arms)

For the final test we made some 100% custom upper A-arms for the same S-10 pre-runner. We used 1/4" thick round steel for this fabrication. We also use a couple pieces of 1/4" plate for additional support and strength. These A-Arms to a little while to make but was pretty easy welding thanks to the Ready Welder. I know some of you may think we put a lot of confidence in a product but after the other test we knew the Ready Welder was asking for a bigger challenge.

** UPDATE: 1-10-04 We've been using this welder for well over 3 years now with no problems at all. It works perfect every time. Excellent product!!

CONTACT INFORMATION:

Premier Power Welder P.O box 639 cadondeal colorado, 81623 1-800-541-1817 Tech fax: 970-963-8875
Website: www.Premierpowerwelder.com

Click here for more images

The World's Most Portable, Affordable,
Powerful and Versatile MIG Welder!

Buy this product online at Pullpal.com

Finally - an affordable mig attachment for your Premier / Link Arc!
Connect to our box and weld for hours
or to 2 batteries and weld 20-45 minutes.

Using the Ready Welder II with the Premier Power Welder, you can control the engine speed which will give you more adjustment to fine-tune your amperage . . . which in turn allows stable heat while welding. By connecting the 10' wire gun with your 25' welding lead cables, you will have a MIG gun 35' from your vehicle.

Gold Medal Award Winner

At the Paris, France International Construction Expo. RWII was awarded the "Medaille d'Or" for the best design, ecology and user benefits for a new product

Ready Welder's mobility and advanced technology for head and wire feed speed control will change the face of Mig-Welding as we know it! (Patents pending)

Connects to all DC output ARC & MIG welders. Also to the Premier Power Welder® Custom 10' molded cable with gas hose. Amp range from 30-300 100% duty cycle with gas @ 24V DC. 70% duty cycle with flux core. Uses standard #2 Tweco consumables. Uses any 4" spool, sizes: .023 to .045 Thumb wheel adjusts wire speed from 50"/min. to over 900"/min. Auto gas valve controlled trgger Black plastic case with foam External 24VDC power supply for circuit board Includes one roll 0f .035 flux core Has built-in stitch mode Sleek ergonomic design Ready for use with battery power 24V = 250 amps and 36V = 350 amps. Welds from 22GA to 3/4" steel, S.S. and up to 3/4" aluminum 20' custom molded extension cords available 2 year warranty 30 day money back guarantee. SALE $489.95 + $22.50 shipping in the continental U.S. Hawaii, Canada, Alaska & International Orders Click Here WE ALSO CARRY THE READY WELDER MODEL 10000ADP-CS (COLD START) Pat Gremillion, owner of Premier Power Welder (with his 40 plus years of welding experience), is very impressed with the Ready Welder II mig unit.

ARC WELDING

Premier Power Welders allow you to weld stainless, mild or high-carbon steel and aluminum with no size or plate thickness limits. Premier's high-frequency pulsating DC current allows you utilization of any AC or DC electrode up through 1/8" at 100% duty cycle. The Premier allows both welding and battery charging using #4 cable leads up to 500' lengths with minimal loss of heat.

HELI ARC/ MIG WELDING

Premier supplies power for both Heli-Arc (TIG) welding for stainless steel and aluminum and MIG welding with up to .035" solid or .045" cored wire.

POWER OUTLET

Premier's control box has a 115-volt DC (maximum 2300 watts/20 amps) power-outlet jack for non-fluorescent lighting and brush-type power tools: grinders, drills, saws, and blenders, frying pans, blow driers, etc.

BATTERY CHARGER

The Land Rover has plenty of room for the Premier Power Welder

Standard mounting for the throttle control is under the hood. For mounting inside a service body or in the rear of a van, simply order an extension harness/ throttle.

The design of the Premier Power Welder has a track record of more than 25 years as of 2004. Proven in all phases of use, it is designed to be simple, reliable, and functional with no unnecessary gauges, dials, and lights. The Premier Power Welder Control Box is backed by a one-year warranty.

• Premier Heavy Duty performance alternators deliver premium battery charging power, high output amps for continuous-duty welding, and 115 volts DC power supply.
  
• The high-frequency pulsating current created by the PREMIER POWER WELDER allows you to weld with 2/3 the amperage that a conventional welder requires.
  
• PREMIER IS AN ESSENTIAL TOOL for off-road, maintenance, utility, farm, construction, and rescue vehicles.

Photos by Ned Bacon
Check out this on-the-trail-fix on this magazine staffers' broken frame rail! After only a few minutes of welding repair, we were on our way again.

THE ULTIMATE UNDERHOOD WELDING SYSTEM -
WELDING CAN BEGIN JUST ABOVE IDLE!

The ONLY underhood welding system
with a PROVEN track record OVER 25 YEARS!

The design of the Premier Power Welder has track record of over 27+ years (as of 2006). Proven in all phases of use, including applications in military, municipal, farming, off-road, rescue, construction & maintenance vehicles. It is designed to be simple, reliable and functional without any unnecessary gauges, dials or lights.

To order the Premier Power Welder for any of the following applications: PP160 -160 AMP SMALL CASE ALTERNATOR 6-12 O'CLOCK MOUNT APPLICATIONS: Chevrolet: pickup, Blazer, Suburban, etc. (5.0 L, 5.7L, 7.4L) '64-'88; Jeep: CJ '74-'86 ('74 & '75 may require customizing); Cherokee (6 & 8 cylinder) '77-'86; Wrangler (4.2L, 258 CI) '87-'90; Grand Wagoneer (5.9L) '74-'91 ('74 & '75 may need customizing); Toyota Tacoma (3.4L / V6) '95 and newer; FJ40s and Buick w/ V8 (up to '88).



All other applications, please call (800) 541-1817

---

25' LEADS ARE ONLY $140 WHEN PURCHASED WITH ANY PREMIER POWER WELDER!*